Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

RAM Clutches 90-2127

RTrack 10.5 Dual Disc Clutch System 1955-85 Small Block & Big Block Chevy (incl 572 crate)

RAM Clutches 90-2127
Representative Image
Product images may differ from actual product appearance.


made in usa
jegs shipping
FREE Shipping
Ships directly from the manufacturer
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
RAM Clutches 90-2127 RTrack 10.5 Dual Disc Clutch System 1955-85 Small Block & Big Block Chevy (incl 572 crate) $1,355.00
RTrack 10.5 Dual Disc Clutch System
  • 1955-85 Small Block & Big Block Chevy (incl 572 crate)
  • 10-1/2'' Diameter
  • 1-1/8''-26 Spline
  • 153-Tooth Ring Gear
  • '0' Internal Balance
  • 300-Series Disc

  • RAM Clutches 90-2127 Details

    300-Series Clutch Disc

    The RAM RTrack 10.5 has a stand driven floater plate provides ultimate holding power and durability for high horsepower street only cars and trucks. Featuring 300 series friction material, the clutch is smooth engaging and rated to handle torque capacity up to roughly 1100-foot pounds without excessive pedal pressure.

  • Stand Driven Floater Plate For Superior Drive Strength
  • Provides Higher Load Capacity For Vehicles w/More Track Use
  • Uses 2400 lbs. Clamp Load Pressure Plate
  • Ultimate In Holding Power And Durability
  • 300 Series Organic Friction Material
  • Strictly Factory Warranty Only

  • Specifications:

    Manufacturer's Part Number:

    The Ultimate in Holding Power & Durability for Street or Strip
    The RTrack Dual is modeled after RAM's highly successful drag racing clutches used in Pro Stock and Pro Mod vehicles. The major difference between these clutches and the Force 10.5 is the floater drive system. RTrack employs a stand-driven floater plate to provide greater torque capacity and negative load for vehicles that see a lot of track time. A 2400-pound clamp load pressure plate produces good holding power without excessive pedal effort. There are two disc series: 300 and 900. The 300 Series has a sprung hub top disc and solid hub bottom disc for smooth engagement. The 900 Series is for higher torque load up to about 1300 ft/lbs so expect some floater plate noise at idle.

    Engineered for today's late model performance cars and older vehicle engine swaps, most RAM Dual Disc Clutches are compatible with factory hydraulic release mechanisms. A clutch's height is critical to proper operation; it prevents the need for spacers or other modification. Dual disc clutches that bolt to a stock flywheel can be a release problem. For clutches that malfunction, add a RAM Internal Hydraulic Bearing.

    The purpose of these clutches is to provide smooth drivability for high power levels that wasn't previously available from single disc clutches with aggressive friction material. The clutch assembly also needs enough weight so it can be driven at lower RPM and maintain vehicle inertia without bucking. If the clutch assembly is too light, low-end drivability suffers. Applications with large camshaft profiles are prone to this and need the inertia of a heavier unit to sustain low-speed drivability. Road race type vehicles, however, benefit from a smaller clutch's lighter weight because the vehicle drives deeper into turns before letting off the throttle and accelerates quicker back to torque range out of turns.

    Click Here for Ram Dual Disc Clutch Application Guide

    Does RAM Clutches 90-2127 fit your vehicle?

    Narrow Results


    • CC: 5737
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )
    Some parts are not legal for use in California or other states with similar laws / regulations