Features:
- For standard automotive, lead-acid, calcium, AGM (absorbed glass mat), start-stop, and Gel Cell batteries
- Provides stable voltage control under varying loads during vehicle ECU reprogramming and diagnostics
- A fully-automatic microprocessor controls the power supply
- Multiple output cable selection
- Anderson plug with interchangeable power cords for different regional users
- Dual cooling fans with temperature-control
- Color-coded positive and negative attachment clamps
- Heavy-duty aluminum case
- Large carrying handle for convenient mobility
- Adjustable rear mounting brackets provide easy installation to a permanent location
- A selectable constant voltage output from 13.0 to 14.8 V DC
- 70 amps continuous output current
- Mode button to select between service and boost modes
- Service mode: prevents battery discharge during service
- Boost mode: quickly adds energy to a severely discharged or large-capacity battery
- Input Current: 15 amps continuous/24 amps intermittent
- Output Current:
- Service -13.5 V, 0-70 amps
- Boost - 14.4 V, 0-70 amps
- Flash - 13-14.8 V, 0-70 amps continuous
- 100 amps intermittent
- Dimensions: 17.880 in. L x 17.760 in. H x 5.550 in. W
- Weight: 19.35 lbs.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.