Polymer In-Line Electric Water Pumps
Whether you are looking for additional water flow to cool your street rod or are racing in the 24 Hours of Lemans, you can count on EMP/Stewart Components products!
Stewart Components has developed in-line electric water pumps with unique features and benefits. Weighing less than 5 pounds and measuring 6'' long with a 4-1/4'' diameter, these pumps have
single speed flow up to 55 GPM.
The electronic control box can be mounted remotely using the prefabricated harnesses sold separately. The pumps can be used alone in many applications or as a booster pump for vehicles that experience overheating problems in low RPM situations.
Because mechanical water pump speed is directly linked to engine RPM, overheating can become a major problem while in parades, cruises, or stop-and-go traffic. An in-line booster pump solves this problem by working with the mechanical pump to create constant added flow to the engine block. These pumps have been proven to increase flow by more than 300% at idle.
Lightweight Polymer with 1-1/4'' or 1-3/4'' slip-on inlet/outlet ports
Is this pump supposed to run continously or can it be shut off. That is, will the water flow through when off with flow from the stock belt driven pump
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.