VMP Performance VMP Ultimate Pulley Removal & Installation Tool
823-VMP-SUA031
VMP Ultimate pulley puller and installer tool for Shelby GT500 will remove and install factory press-fit style pulley while supercharger is still installed on the car. This tool utilizes fine thread bolts, bearings, and a supplied grease pack which makes using this tool a breeze. Less expensive tools that use course thread bolts and no bearing can make a pulley removal and installation 10 times harder, VMP tools avoid these headaches due to its proper design. This puller is different from most on the market. The precision-machined aluminum clamshell that clamps onto the pulley and grabs it by the ribs, and leaves no marks. This prevents damage and applies equal pulling force all the way around the pulley, for easy damage-free removal. This tool also works with Lightnings, Roushcharged F150s, Roushcharged Mustangs (09+ M90 with a press-fit pulley or P51 TVS).
HD Clamshell Set | 2 | Clamps onto pulley |
1/2-13 bolts x 3 | 2 | Holds clamshell together |
3/8-16 bolts x 4 | 2 | Holds clamshell to square bar |
3/8 washers | 2 | For use on long bolts in bar |
Square bar | 1 | Used for pulley removal only |
3/4-16 bolt with nub | 1 | Used for removal ONLY |
5/8-18 bolt with tapped hole | 1 | Used for installation ONLY |
M8 x 40 full thread screw | 1 | Used for installation of pulley |
Large 5/8 D-3 bearing | 1 | Used for installation of pulley |
Small washers | 1 | Used for removal of pulley |
5/8-18 nut | 1 | Used for installation of pulley |
Grease Packet | 1 | For big bolt threads, nut, & washer |
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.