800.345.4545
Unrivaled Customer Service
And Expert Tech Advice!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Weiand 142 Series Supercharger Kit Small Block Chevy, Universal

Weiand 6500-1
Representative Image
Product images may differ from actual product appearance.

925-6500-1

made in usa
jegs shipping
FREE Shipping
Ships
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Weiand 142 Series Supercharger Kit Small Block Chevy, Universal $2,299.95
142 Series Supercharger Kit
  • Small Block Chevy, Universal
  • Long Nose
  • 6-Rib Pulley Width
  • Drive Ratio W/ Included Pulleys: 1.95:1
  • Satin Finish

  • Weiand 6500-1 Details

    142 Series Superchargers - Chevrolet

  • 6" Lower Pulley
  • 3.05" Upper Pulley

  • Specifications:

    Finish
    Satin
    Regulator Included
    No
    Fuel Injectors Included
    No
    Blower Size
    142
    Pulley Style
    Serpentine Pulley
    Wiring Harness Included
    No
    Belt Tensioner Included
    No
    Carburetor Quantity
    One
    Computer Chip/Programmer Included
    No
    Crankshaft Pulley Grooves
    6-groove, serpentine
    Damper Included
    No
    Engine Block Style
    Stock/OEM standard deck
    Fuel Pump Included
    No
    Fuel Rails Included
    No
    Intercooler Included
    No
    Linkage Included
    No
    Nose Style
    Long
    PTFE Lined Rotors
    No
    Quantity
    Sold as a kit
    Supercharger Finish
    Satin
    Supercharger Model
    142
    Supercharger Pulley Included
    No
    Manufacturer's Part Number:
    6500-1

    If you are looking for a supercharger to fit under the hood of your hot rod, then Weiand's 142/144 series superchargers are exactly what your looking for! These Pro-Street supercharger kits are designed and engineered to give small block Chevy's 25-40% more power while maintaining outstanding street-ability!

    144 Series Weiand Superchargers feature a low-profile design that offers even more hood clearance than the 142 series. The 144 series is great for tight engine compartments and they are a practical addition to any performance or tow vehicle where hood clearance and/or the use of a long water pump and three v-belts are required. PTFE tipped rotors in the 144 superchargers create tight rotor to case tolerances for improved boost capabilities.

    Both the 142 and 144 series superchargers feature 100% NEW CNC machined parts (no remanufactured components). New thick-wall cases and rotors eliminate high-RPM flex and provide maximum reliability. All superchargers are 100% Boost Tested to help you squeeze the maximum power and efficiency out of your supercharger!

    Features/Benefits
  • 400-450 Horsepower from a mild 350 Chevy.
  • Low-Profile Design (may require cowl induction hood in some applications).
  • Improved torque for heavy cars and towing applications.
  • Great power adder for low compression crate motors.
  • Full-Time Power every time you hit the gas with no lag!

    Installation Notes:
  • Superchargers are perfectly suited for stock/modified engines with 7.5:1 to 9:1 compression ratios.
  • Superchargers mount to manifold using 4 bolts through the bearing plates.

    Kits Include: Manifold, Blower Assembly, Drive Snout, Pulleys, Belt and Hardware.

    Supercharger Troubleshooting Guide

  • Does Weiand 6500-1 fit your vehicle?

    Narrow Results
    Filter By
    Year
    Filter By
    Make
    Filter By
    Model
    Filter By
    SubModel
    Filter By
    EngineType
    Filter By
    CC
    Filter By
    Liter
    Filter By
    Aspiration

    1979-1986 GMC K3500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1979 BUICK SKYLARK

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1976 GMC C1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1980 CHEVROLET K20 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • Aspiration: N
    • SubModel: CUSTOM DELUXE
    • Engine Vin: R
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1972 CHEVROLET CAPRICE

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: J
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1970 CHEVROLET BROOKWOOD

    • CC: 6556
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1978-1979 CHEVROLET CORVETTE

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • EngineType: ALL
    • SubModel: ALL

    1972-1973 CHEVROLET C20 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1979 CHEVROLET MALIBU

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: CLASSIC LANDAU
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978 CHEVROLET NOVA

    • CC: 5735
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 GMC K1500 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1995 GMC K1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SIERRA SPECIAL
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1988-1992 CHEVROLET K1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1977 CHEVROLET C10 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1979 CHEVROLET C10 SUBURBAN

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1976 GMC SPRINT

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1971 CHEVROLET IMPALA

    • CC: 5736
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1978 GMC K15 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1972 CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: GREENBRIER
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972-1981 GMC G15/G1500 VAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: VANDURA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1978 GMC C25 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 GMC K2500 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1989-1991 CHEVROLET V3500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971 CHEVROLET C10 PICKUP

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1977-1978 CHEVROLET CAMARO

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: LT
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1985 CHEVROLET G30 VAN

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: CHEVY VAN
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1987 CHEVROLET R10 SUBURBAN

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981-1986 GMC K1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1972-1973 CHEVROLET K20 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1979-1980 GMC K2500 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: SIERRA CLASSIC
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1987-1991 GMC R3500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972-1973 CHEVROLET K10 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1970-1972 CHEVROLET EL CAMINO

    • CC: 6555
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: CUSTOM
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1982-1986 CHEVROLET K10 SUBURBAN

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1969-1973 CHEVROLET CAMARO

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: RS
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1983-1987 PONTIAC GRAND PRIX

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: BROUGHAM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981-1986 CHEVROLET C20 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CUSTOM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET K20 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: CHEYENNE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1972-1973 CHEVROLET K10 SUBURBAN

    • CC: 5736
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 CHEVROLET CAPRICE

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1975-1978 GMC C35/C3500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1982 GMC K1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SIERRA GRANDE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 CHEVROLET CAPRICE

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: CLASSIC LANDAU
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1980 CHEVROLET K30 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • Aspiration: N
    • SubModel: SILVERADO
    • Engine Vin: R
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1977-1979 OLDSMOBILE STARFIRE

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: GT
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1972-1974 CHEVROLET BEL AIR

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: J
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1993 GMC G15/G1500 VAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: RALLY STX
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1977 CHEVROLET MONZA

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: TOWNE COUPE
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981-1986 GMC K1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: HIGH SIERRA
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1969-1972 CHEVROLET CHEVELLE

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: NOMAD
    • CUI: 307
    • EngineType: V8 ( 5.0 L / 307 )

    1981-1986 CHEVROLET K30 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CUSTOM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: MALIBU
    • Engine Vin: K
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975 CHEVROLET IMPALA

    • CC: 5735
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1972 GMC C25/C2500 SUBURBAN

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1994-1995 CHEVROLET K2500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1986 CHEVROLET K10 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1973-1974 CHEVROLET MALIBU

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1969-1971 CHEVROLET CHEVELLE

    • CC: 5736
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CONCOURS ESTATE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987-1989 GMC R2500 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1978 CHEVROLET K5 BLAZER

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 GMC C2500 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1985 GMC JIMMY

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: HIGH SIERRA
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1974 CHEVROLET MALIBU

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979-1980 GMC G35/G3500 VAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: RALLY
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1985-1986 CHEVROLET K20 SUBURBAN

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1979 CHEVROLET MALIBU

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: LANDAU
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1972 CHEVROLET CAPRICE

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1976-1979 CHEVROLET C30 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: SCOTTSDALE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1978-1980 GMC C1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: HIGH SIERRA
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1971-1974 CHEVROLET IMPALA

    • CC: 6556
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1972 CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: NOMAD
    • Engine Vin: K
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1992-1993 CHEVROLET K2500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SILVERADO
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET K20 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • Aspiration: N
    • SubModel: CUSTOM DELUXE
    • Engine Vin: X
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1980-1983 CHEVROLET CAPRICE

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: CLASSIC
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1972 CHEVROLET BROOKWOOD

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: K
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1981 CHEVROLET C10 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • EngineType: ALL
    • SubModel: CUSTOM

    1974 CHEVROLET MONTE CARLO

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 BUICK CENTURY

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Will Not Work On Vortec Or Fast Burn Cylinder Heads~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: LIMITED
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1988-1995 CHEVROLET C1500 PICKUP

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1972 CHEVROLET CHEVELLE

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • Aspiration: N
    • SubModel: MALIBU
    • Engine Vin: L
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1981 CHEVROLET K30 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CHEYENNE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1979 CHEVROLET CAMARO

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: RALLY SPORT
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981-1986 CHEVROLET C20 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CUSTOM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET K20 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • Aspiration: N
    • SubModel: SILVERADO
    • Engine Vin: R
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1976-1978 GMC C25/C2500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1974 CHEVROLET K30 PICKUP

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1980 CHEVROLET G20 VAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: CHEVY VAN
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1982-1986 CHEVROLET C10 SUBURBAN

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1981 CHEVROLET G20 VAN

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: NOMAD
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )

    1980 GMC C1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 6.6
    • SubModel: HEAVY HALF
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1981-1986 CHEVROLET K10 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CUSTOM
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1980 CHEVROLET MALIBU

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SPORT
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1989-1990 CHEVROLET R3500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SCOTTSDALE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 GMC V1500 PICKUP

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: SIERRA CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1974 CHEVROLET K10 PICKUP

    • CC: 5737
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1987 CHEVROLET BLAZER

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CUSTOM DELUXE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1978 CHEVROLET MALIBU

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • EngineType: ALL
    • SubModel: CLASSIC ESTATE

    1987-1991 GMC V1500 SUBURBAN

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: BASE
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1975-1977 CHEVROLET EL CAMINO

    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.7
    • SubModel: CLASSIC
    • CUI: 350
    • EngineType: V8 ( 5.7 L / 350 )

    1977-1979 CHEVROLET K10 PICKUP

    • CC: 5031
    • Fitment_Note: Elongation Of Four Center Blt Holes May Be Req. To Install Cast-Iron Heads~For Use w/Three V-Belt Accessory Drive Pulley Crankshafts~Fits Most Short/Long Water Pump Applications~Not Compatible with Serpentine Accessory Drive Systems
    • Liter: 5.0
    • SubModel: SILVERADO
    • CUI: 305
    • EngineType: V8 ( 5.0 L / 305 )
    6500-1 is rated 5.0 out of 5 by 2.
    Rated 5 out of 5 by from 142 weiand Everything fit excellent. Love the throttle bracket that came in kit. Looks and power are way better now.
    Date published: 2015-12-27
    Rated 5 out of 5 by from awsome purchase I am so pleased with JEGS and their service. If anyone wants quality, go to JEGS for great prices and service.
    Date published: 2015-11-15
    • y_2018, m_9, d_23, h_2
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_2
    • loc_en_US, sid_10001_10001_234064, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    How much horsepower will this give a 383 striker motor with a 750 holley

    Asked by: Jason Holder
    This will depend on the pulley ratio you choose. Typically around 400-500 hp.
    Answered by: Rusty B
    Date published: 2018-09-19

    Will this work for a 96 LT1 engine?

    Asked by: LT1noOb
    No, this is made to fit the GEN I small block Chevy engine.
    Answered by: Rusty B
    Date published: 2018-08-27

    Will thIs work with a Chevy gen 2 lt1 engine?

    Asked by: Aschaef12
    No, this is made to fit the GEN I small block Chevy engine.
    Answered by: Rusty B
    Date published: 2018-08-27

    Is this compatible with a 1981 Chevrolet Scottsdale c20 standard cab 2wd? Engine is a sbc 350 5.7L with an Edelbrock 1405 Performer 600 CFM 4 Barrel Carburetor, Manual Choke

    Asked by: Zeus47
    Yes, this supercharge is compatible with your Chevy truck.
    Answered by: Rusty B
    Date published: 2018-08-15

    I have a 1986 Chevy G10 van with a stock 305 cubic inch engine engine. Will the 144 unit fit?

    Asked by: COBRA STRIKE
    No, you would need to modify the front of the van and the engine cover to allow this to fit.
    Answered by: Rusty B
    Date published: 2018-07-20

    I bought a 350 sbc ( 809-12681429 ) with this supercharger, i was wondering if my carb would work find with it all? The carb is a Holley 600 CFM STREET WARRIOR CARBURETOR?

    Asked by: Emmanuel
    Yes, that Holley carb will work with this supercharger kit.
    Answered by: Rusty B
    Date published: 2018-07-17

    I have a 1990 caprice classic with a 305 5.0 will this kit fit? And more importantly does everything that i need to install in this kit?

    Asked by: Tocayo
    No, this will not fit your engine, this is made for the GEN I small block Chevy engines.
    Answered by: Rusty B
    Date published: 2018-07-10

    Hello can I use the 10 groove pulleys from the 144 and put them on the 142

    Asked by: Tanner h
    Yes, most of the pulleys are interchangeable.
    Answered by: Rusty B
    Date published: 2018-06-18
    • y_2018, m_9, d_23, h_2CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_27
    • loc_en_US, sid_10001_10001_234064, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need
    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.