JEGS 9.25 in. Impulse 9 Series Wound DC Motor contains a double ended shaft and is pre-drilled to allow for brush advance in either Neutral, advanced CWDE or advanced CCWDE (standard).
The commutator bars are securely attached to the arbor, so they will be less likely to lift. The drive shaft is bored for a pilot bearing then drilled & tapped for a 5/16 in.-18 bolt. The tail shaft also has a 1/4 in.-20 bolt hole to mount tach sensors or secure couplers and accessories.
Class "H" insulation is used throughout the motor. The drive shaft and tail shaft have standard keyways cut into them for ultimate performance.
- 9.25 in. diameter Series Wound DC Motor
- Tailshaft diameter 0.875 in.
- Advanced Timing