Audi
4510-11022 Features:
During development of the Audi 2.0T Exhaust systems with performance software, AWE recorded high intake air temperatures. The stock front mount intercooler wasn't able to effectively cool the intake charge at that performance level, which allowed temperatures to rise and hurt performance, as rpms increase. AWE set out to engineer the AWE 2.0T Front Mounted Performance Intercooler to bring intake temperatures back under control. AWE employed sophisticated modeling to design an intercooler that uses an end tank / core package significantly larger than stock while striving to re-use the robust factory hoses and clamps to keep costs down. This end tank design is a proven winner and is in use on multiple AWE platforms. 14 revisions later, the perfect FMIC was born. "While we knew this engine ran very hot, and could really benefit from improved intercooling, the test results shocked even us. The AWE 2.0T Front Mounted Performance Intercooler was able to reduce Intake Air Temperatures (IATs) by a maximum of 45 degrees Fahrenheit over stock, a difference of nearly 30%! The massive drop in IATs results in an additional 21 crank hp on a chipped car and completely stable power under the hottest outside conditions." Whether you're simply running enhanced software or are planning on a larger turbo upgrade for your car, the AWE intercooler solves heat related issues that come with more turbo boost. Keeping your intake air temperatures low results in more power, better engine output stability when outside temps climb, and the safety margin needed when pushing the limit. Currently not available for vehicles equipped with Audi Drive Select. Please note, the AWE 2.0T Front Mounted Performance Intercooler is for racing use only.Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.