Advance Adapters 50-0408 Features:
- The GM 4L60E adapter to the Land Cruiser 19 spline transfer case is 6.750 in.� in length. And the overall length of the transmission and adapter is 30.50 in.�. The adapter material is 356 T6 heat treated aluminum alloy. The adapter kit includes an adapter housing, spud shaft w/ 19 spline, GM VSS sensor, t-case shifter bracket, t-case bracket spacers, snap rings, retainer, sealed bearing, gasket, nylon lock nut, fastening hardware, and adapter instructions.
- Transfer case
- This adapter assembly fits August 1980 to 1989 transfer cases. The transfer case design was changed to a split-case design configuration with a 19 tooth internal spline on the input gear.
- Transmission
- The adapter kit is designed for exclusive use with a 2wd 4L60E with a non-removable bellhousing. This transmission is identical to the 700R / 4L60 except that it is an electronically controlled transmission. GM manufactures this transmission in two versions. Both of these transmissions use a reluctor ring connected to the GM engine computer for proper shifting points. The first version of this transmission is a mirror image of the 700R, but it requires a reluctor ring. For these kits we adapt around the 2WD version of this transmission. The kits require the use of a stock 2WD output shaft with the stock reluctor ring. You will be required to shorten this shaft as indicated on the instruction sheet provided in your kit.
- This housing is drilled and tapped for the stock reluctor ring pickup. The GM sensor for this housing is included in this kit and allows the proper signal to operate your transmission.
- SENSOR- SPEEDOMETER / 300619
- ADAPTER- T350/700R TO FJ60 T/C / 51-8900
- SHAFT- 700R4 SPUD TO L/C 19SP / 52-8300
- BRACKET- TOY 19T TC SHIFTER / 715547
- SPACER- T/CASE BRACKET / 715548
- SPACER- SPECIAL L/C .606 OAL / 716142
- SPECIAL SNAP RING FOR 308 BGR / 716321
- GM AUTO TRANSMISSION O RING / 716511
- FJ60 T/C GASKET / 716571
- SEAL (FJ60 T/C FRONT INPUT) / 716758
- 12mm X 1.25TH X 90mm H.H.C.S. 10.9 grade / 720062
- 12mm X 1.25TH X 40mm H.H.C.S. 10.9/ZINC / 720063
- 12mm X 1.25TH X 20mm SET SCREW cup point / 720090
- S.H.C.S. 3/8 -16 X 2-1/2 / 723734
- FLAT WASHER 7/16 SAE ZINC / 724302
- METRIC SHAFT NUT 26-1.5 / 728703
- BEARING- 308 OPEN W/SNAP RING / 716317
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.