Advance Adapters 50-3034A Features:
- Note: The 1980-82 Dana 300 can is identified with a 3.250 in. length tailhousing and the speedometer hole provision measuring .875 in. in diameter.
- The Jeep Dana 300 transfer case is a strong, compact transfer-case. However, the rear output shaft is not as strong as it could be. The stock rear output is known to be weak and is no match for lower gears, big tires, and V6 / V8 engines.
- We offer a heavy duty tailhousing kit for the Jeep Dana 300. This kit features a new 1 3/8 in.�-32 spline rear output shaft, 356 T6 heat treated aluminum alloy tailhousing, your choice of rear yoke, shims, bearings, fastening hardware, and detailed instructions. The new speedometer drive gives you the advantage of calibrating your tire and axle gearing. Due to this feature, our tailhousing is 1.5 in.� longer than stock.
- NOTE: Speedometer drive (301506) is sold separately. The new speedometer drive gives you the advantage of calibrating your tire and axle gearing.
- Transfer Case
- The kit is designed for exclusive use with the Jeep Dana 300 transfer case. The adapter assembly is application specific for the short version tailhousing of the Dana 300. The short style tailhousing measures approximately 3.5 in.�. This Dana 300 will require our 50-3034 kit (short style).
- This kit can be used with the 1980 Scout Dana 300 version
- PLUG- SPEDOMETER HOLE / 300104P
- SHIM ATLAS REAR OUTPUT SHAFT / 300491
- BEARING-TAPERED SET X30207 CUP & Y30207 CONE / 300513
- BEARING-CAGED NEEDLE SUPPORT / 300515
- GEAR-SPEEDOMETER DRIVE 13 TOOTH / 300625
- CIRCLIP SPEEDO RING GEAR / 300627
- RETAINER SPD-O HOUSING CLIP / 300629
- O-RING- SPEEDOMETER HOUSING / 300630
- FITTING-1/8 NPT BRASS 90 ELBOW / 300922
- BOLT- 5/16 -18 x 3/4 H.F.C.S. NON SERRATED / 301403
- HOUSING- D20 REAR OUTPUT 32SP / 51-3020
- SHAFT- D300 OUTPUT 32SP / 52-3000
- WASHER- D300 HD OUTPUT THRUST / 716296
- BEARING TAPERED ROLLER 26822 CUP / 300514
- NUT 3/8 -16 PLATED GRD 5 / 723701
- STUD BOLT 3/8 -16 X 1-1/4 / 723713
- BOLT 3/8 -16 X 1.25 in. SHCS ZNC / 723730
- BEARING TAPERED ROLLER 26885 CONE / 300314
- NUT- 7/8 -20 FLANGE LOCKNUT ATLAS/SYE 32T / 300476
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.