Advance Adapters 50-9551A Transfer Case Adapter, Dodge & GM(10/27) NP205-29Spl Input To GM 6L90 29Spl. Trans
050-50-9551A
Product Q&A
View Now
Advance Adapters 50-9551A Features:
- This adapter kit will adapt the New GM automatics 6L80E or 6L90E 4WD to either GM & Dodge NP205 Figure 8 bolt pattern NP205's. Kit 50-9551A, 6L90E adapter assembly includes new female 29 spline NP205 input gear and shaft, NP205 adapter ring, 6L90E conversion tail housing, input shaft bearing and fastening hardware.
- Kit 50-9551B, 6L80E adapter assembly includes new 32 spline female NP205 input shaft , NP205 adapter ring, 6L80 conversion tail housing, input shaft bearing and fastening hardware
- Transfer Case
- The kit is designed for GM NP205 figure 8 front bolt pattern NP205 10, 27 or 32 splines and Dodge NP205 figure 8 bolt pattern 23 & 29 spline NP205 transfer case. Please note that there is no machine work needed on the GM & Dodge NP205 with big bearing bore cases ( 29 & 32 spline inputs). Note: Small bearing bore case Dodge 23 spline & GM 10, 27 spline NP205 transfer cases will need the front input bearing bore machined to big bore specifications.
- Transmission
- GM's new Hydra-Matic 6L80 & 6L90 transmissions are the first of a new family of modular six-speed rear-drive transmissions. The transmissions feature two overdrive gears and a wide, 6.04:1 gear ratio spread to improve performance and fuel economy when compared with conventional four- and five-speed automatic transmissions. With two overdrive gears, engine rpm is reduced by approximately 9 percent at 60 mph - a reduction to about 1,500 rpm. Lower engine rpm can bolster fuel economy because less fuel is used. A lower-rpm cruising speed also enhances smoothness and reduces noise heard in the vehicle's cabin.
- SNAP-RING EXT INPUT GEAR NP / 340407
- ADAPTER- NV4500 TO NP205 T/C / 51-0206
- ADAPTER- 6L80/6L90 TO GM NP205 / 51-9601
- GEAR- NP205 INPUT 46T / 52-9600
- SHAFT- NP205 INPUT 29T / 52-9601
- BEARING 6210-T/C INPUT GEAR BEARING / 716315
- SNAP RING-EXTERNAL 1 15/16 / 716467
- SEAL CR#19466 / 716729
- H.H.C.S. 10mm X 1.5TH X 20mm GRD10.9 zinc / 720044
- BOLT 3/8 -16 X 1.25 in. SHCS ZNC / 723730
- 3/8 -16 X 1-1/2 S.H.C.S. zinc / 723740
- FLAT WASHER 7/16 SAE ZINC / 724302
- LOCK WASHER 7/16 STD PLTD / 724303
- H.H.C.S. 7/16 -14 X 1 / 724307
- NP205 gasket / 716574
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.