Brodix BP IK 215 Series Assembled Aluminum Cylinder Heads [70 cc Chamber]
158-1021008
Product Q&A
View Now
![BP IK 215 Series Assembled Aluminum Cylinder Heads [70 cc Chamber]](http://www.jegs.com/images/photos/100/158/158-1021008.jpg "BP IK 215 Series Assembled Aluminum Cylinder Heads [70 cc Chamber]")
BP IK 215 Series Cylinder Heads
This fully assembled and machined cylinder head features a 70 cc combustion chamber with valves, guides, seats, rocker studs, springs retainers, locks, and springs for a hydraulic roller camshaft installed.
Features
- High-flowing intake port with over 279 CFM of flow
- Competition valve job with blended bowls
- Strong casting from A-356 aluminum is easily repairable
- Accessory Bolt Holes are Drilled
Cylinder Head Specifications
- Intake Port Volume: 215 cc
- Combustion Chamber Volume: 64 cc
- Valve Sizes: 2.080 in. Intake / 1.600 in. Exhaust (11/32 in. Stem Diameter)
- Spark Plug Configuration: Straight
- Manganese Bronze Valve Guides
Installation Notes
- Torque Heads: 70 ft.-lbs.
- Torque Rocker Studs: 40-45 ft.-lbs.
- Recommended Intake Gasket: Fel-Pro 375-1205
- Recommended Head Gaskets: Fel-Pro 375-1003 (350 ci) / 375-1004 (400 ci) or Cometic 245-C5399 (350 ci) / 245-C5403 (400 ci)
- Recommended Exhaust Gaskets: Fel-Pro 375-1406 or Cometic 245-C5415
- Recommended Head Bolts: ARP 070-134-3601 or Manley 660-42313
- Recommended Head Bolt Washers: Manley 660-42102
- Recommended Head Studs: ARP 070-134-4001 (6-point)
- Recommended Intake Manifold: Brodix HV 1014 (158-1014) / HV 1016 (158-1016)
- Spark Plug Specs: 14 mm Thread, .750 in. (3/4 in.) Reach, Gasket Seat
- Valve Angle: 23 Degree
- Angle Milling: .0078 in. per cc
- Flat Milling: .0060 in. per cc
- Pushrod Slots: Standard
- Stud Girdle: Standard
- Rocker Arms: Standard
- Lifters: Standard
- Exhaust Pattern: Standard
- Valve Centerline: Standard
- Spring Pockets: May not be cut any larger or deeper than 1.550 in.
Specifications:
Confirming this is a 70cc combustion chamber... description is conflicting
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.