12 Days of Christmas
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Brodix 1111003

-11X Series Cylinder Heads Spread Exhaust Port

Brodix 1111003

158-1111003

jegs shipping
FREE Shipping
Ships 12/19/16 if Ordered Today
Brodix 1111003 -11X Series Cylinder Heads Spread Exhaust Port $2,782.28
-11X Series Cylinder Heads
  • Spread Exhaust Port
  • 225cc Intake Ports
  • 64cc Combustion Chambers
  • 2.080'' Intake / 1.600'' Exhaust Valves
  • 1.550'' Dia. Springs - 240# Seat Pressure
  • Titanium Retainers
  • Angle Plug
  • Assembled, 2/pkg.

  • Brodix 1111003 Details

    -11X Series Cylinder Heads

  • 64cc Combustion Chambers
  • Spread Exhaust Ports
  • Cylinder Head Specifications
  • Intake Port Volume: 225cc
  • Combustion Chamber Volume: 64cc
  • Valves: 2.080'' dia. x 5.065'' o.a.l. Intake / 1.600'' dia. x 5.065'' o.a.l. Exhaust ( 11/32'' Stem Diameter )
  • Valve Springs: 1.550'' Diameter - Open Pressure: 550 lbs.; Closed Pressure: 240 lbs.; Installed Height: 1.950''; Max Lift: .700''
  • Spring Retainers: 1.550'' 10° Titanium
  • Rocker Studs: 7/16''
  • Guide Plates: 5/16''
  • Valve Seals: 11/32''
  • Spark Plug Configuration: Angled

    Facts and Related Components
  • Torque Heads: 70 ft-lb.
  • Torque Rocker Studs: 40-45 ft-lb.
  • Intake Gasket: Fel-Pro p/n 375-1206, Cometic p/n 245-C5414
  • Head Gasket: Fel-Pro p/n 375-1003 (350ci) / 375-1004 (400ci) or Cometic p/n 245-C5399 (350ci) / 245-C5403 (400ci)
  • Exhaust Gasket: Brodix p/n 158-MG1500 (Spread Port)
  • Head Bolts: ARP p/n 070-134-3601 or Manley p/n 660-42313
  • Head Bolt Washers: MANLEY p/n 660-42102
  • Head Studs: ARP p/n 070-234-4301 (12-point)
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 23°
  • Angle Milling: .0078'' per cc
  • Flat Milling: .0060'' per cc
  • Pushrod Slots: 40/60
  • Stud Girdle: 40/60 Brodix p/n 158-BR6440
  • Rocker Arms: Standard, T&D Economy 40/60 2256, Jesel 40/60 Shaft System KPS 01302
  • Lifters: Standard
  • Exhaust Pattern: Standard or Spread Port
  • Valve Centerline: 40/60
  • Spring Pockets: May not be cut any larger or deeper than 1.550''
  • Accessory Bolt Holes are Drilled
  • Recommended Intake Manifold: Brodix BM 1000(p/n 158-BM1000) / HV 1000 (p/n 158-HV1000) / HV 1002 (p/n 158-HV1002) / SE 100 (p/n 158-SE100) / SE 102 (p/n 158-SE102)

  • Specifications:

    Manufacturer's Part Number:
    1111003

    Available Standard or Spread Exhaust Ports
    23° Intake & Exhaust Valve Angles

    The Brodix Small Block Chevy -11X Series Aluminum Cylinder Heads are available with a standard or spread exhaust port pattern. This 23° head flows 285 cfm @ .700'' lift straight out-of-the-box with as-cast runners and chambers. The BP -11X Series heads feature CNC ported combustion chambers that flow up to 316 cfm @ .700'' lift. Brodix recommends this head be installed on a 400ci+ engine. The -11X requires a special stud girdle and longer pushrods. Piston valve notches must be checked for clearance. A valve length of .150'' longer than stock is required. Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. The industry standard has been taken to the next level with modernized CNC porting. Other features include a thick deck surface that is compatible with nitrous, drilled and tapped holes on the ends for standard drive accessories, phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel. Sold in Pairs. Made in the USA!

      VALVE SPRING   Specs
      1.550'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''
  • Items You Need