Free Shipping & Handling on Orders Over $95 - Order by 11pm EST for Same-Day Shipping!
Shop By Vehicle
Shop By
All Categories

Gift Certificates
My Account
E-Mail Signup
Catalog Request

Brodix 2038105

BP BB-3 XTRA O 351 Series Cylinder Head CNC Ported

Brodix 2038105

Part Number: 158-2038105

BP BB-3 XTRA O 351 Series Cylinder Head
  • CNC Ported
  • 351cc Oval Intake Ports
  • 119cc Combustion Chambers
  • 2.350'' Intake / 1.880'' Exhaust Valves
  • 1.645'' Dia. Springs - 330# Seat Pressure
  • Titanium Retainers
  • Assembled, 1/pkg.
  • $2,264.28
    Ships 11/02/16
    if Ordered Today
    FREE Shipping
    Brodix 2038105 BP BB-3 XTRA O 351 Series Cylinder Head CNC Ported $2,264.28

    Brodix 2038105 Details

    BB-3 XTRA O 351 Series Cylinder Heads

  • 351cc Intake Port Volume
  • 1.645'' Diameter Valve Springs - 945# Open, 330# Closed Spring Pressure
  • 100% CNC Ported
  • Cylinder Head Specifications
  • Intake Port Volume: 351cc - Oval Port
  • Combustion Chamber Volume: 119cc
  • Valves: 2.350'' dia. x 5.568'' o.a.l. Intake / 1.880'' dia. x 5.494'' o.a.l. Exhaust ( 11/32'' Stem Diameter )
  • Valve Springs: 1.645'' Diameter - Open Pressure: 945 lbs.; Closed Pressure: 330 lbs.; Installed Height: 2.100''; Max Lift: .875''
  • Spring Retainers: 1.645'' 10° Titanium
  • Rocker Studs: 7/16''
  • Guide Plates: 3/8''
  • Valve Seals: 11/32''
  • Spark Plug Configuration: Angled

    Facts and Related Components
  • Torque Heads: 70 ft-lb.
  • Torque Rocker Studs: 40-45 ft-lb.
  • Intake Gasket: Brodix p/n 158-MG2104
  • Head Gasket: 4.540'' Bore - Fel-Pro p/n 375-1017, Cometic p/n 245-C5433; 4.600'' Bore - Fel-Pro p/n 375-1057, Cometic p/n 245-C5434
  • Exhaust Gasket: Fel-Pro p/n 375-1411 or Cometic p/n 245-C5429
  • Head Bolts: ARP p/n 070-135-3606, Manley p/n 660-42192
  • Head Studs: ARP p/n 070-235-4702 (12-point)
  • Spark Plug Specs: 14mm Thread, .750'' (3/4'') Reach, Gasket Seat
  • Valve Angle: 24° and 4° Intake, 15° and 4° Exhaust
  • Angle Milling: .0066'' per cc
  • Flat Milling: .0050'' per cc
  • Pushrod Slots: Standard
  • Pushrods: Check pushrod clearance with head installed on the engine block before final assembly
  • Stud Girdle: Standard, Brodix p/n 158-1230
  • Rocker Arms: Standard
  • Lifters: Standard
  • Pistons: 2° Valve Rolled Piston
  • Exhaust Pattern: Raised .600''
  • Spring Pockets: May not be cut any larger or deeper than 1.625''
  • Accessory Bolt Holes are Drilled
  • Recommended Intake Manifold: Brodix SA 2017 (p/n 158-SA2017) / SA 2027 (p/n 158-SA2027) / BM 2017 (p/n 158-BM2017) / BM 2027 (p/n 158-BM2027)

  • Specifications:

    Accessory Bolt Holes Drilled
    CNC-Machined Combustion Chamber
    CNC-Machined Exhaust Runner
    CNC-Machined Intake Runner
    Combustion Chamber Volume (cc)
    Cylinder Head Finish
    Cylinder Head Material
    Cylinder Head Style
    Damper Spring Included
    Exhaust Port Location
    Exhaust Port Shape
    Exhaust Valve Angle
    Exhaust Valve Diameter (in.)
    Exhaust Valves Included
    Guideplates Included
    Heat Crossover
    Intake Port Location
    Intake Port Shape
    Intake Runner Volume (cc)
    Intake Valve Angle
    Intake Valve Diameter (in.)
    Intake Valves Included
    Lock Style
    10 degree
    Locks Included
    Machined for O-Ring
    Maximum Valve Lift (in.)
    Number of Springs Per Valve
    Oiling Style
    Through pushrod
    Outside Diameter of Outer Spring (in.)
    Sold individually
    Retainer Material
    Retainers Included
    Rocker Arm Nut Thread Size (in.)
    Rocker Arm Nuts Included
    Rocker Arm Studs Included
    Rocker Arms Included
    Steam Holes Drilled
    Valve Cover Mounting Style
    Perimeter bolt
    Valve Guide Material
    Phosphorous bronze
    Valve Guides Included
    Valve Seat Machine Style
    Valve Seat Material
    Ductile iron
    Valve Seats Machined
    Valve Springs Included
    Valve Stem Seals Included
    Manufacturer's Part Number:

    Innovatie Design and Performance That Accepts Most Standard BB-Chevy Components!
    24°/4° Intake & 15°/4° Exhaust Valve Angles

    Brodix built the BB-3 XTRA Series to take the conventional big block to the next level. These cylinder heads feature a valve angle that is rolled two-degrees. The BB-3 XTRA Series is available in a Rectangular-shaped or Oval-shaped intake port configuration, and both are offered in an out-of-the box version or completely CNC ported. The out-of-the-box versions features a CNC'd intake port match and bowls are blended while the intake ports, exhaust ports and combustion chambers remain as casted.
    The Rectangle Port BB-3 XTRA 345 series and BB-3 XTRA 363 series, both with CNC ported 119cc combustion chambers, CNC bowls blended and ports matched, easily flow over 390 cfm. The Rectangular Port BP BB-3 XTRA series are 100% CNC ported and available in two port volumes, 366cc and 380cc. The 380cc version flows over 440 cfm.
    The Oval Port BP BB-3 XTRA O series are also 100% CNC ported and available in three port volumes: 332cc, 351cc, and 365cc. This wide range of port volumes allows the oval port to compliment virtually any engine combination available. Port shape, port velocity, and the latest technology have propelled these cylinder heads to the top of their class.
    While creating the 100% CNC Ported BP series BB-3 XTRA, the professionals at Brodix invested many long hours on the flow bench and at the track developing a completely ported cylinder head. The bottom line is that Brodix builds you the most accurate, best flowing out-of-the-box cylinder heads available at the best price. These cylinder heads accept standard BB-Chevy intake manifolds, and rocker arms. The exhaust ports are raised .600'' higher than stock (check all clearances for off the shelf headers). Valve cover rails are now raised to assure no oil leakage. Every casting is poured from A-356 virgin aluminum and tested before Brodix utilizes their in-house processes such as finish machining and heat treating to assure that you receive the best products for your hard-earned money. Other features include a thick deck surface that is compatible with nitrous, drilled and tapped holes on the ends for standard drive accessories, phosphorous bronze valve guides and hardened valve seats installed for unleaded fuel. Sold Individually, 1/pkg. Made in the USA!

      VALVE SPRING   Specs
      1.550'' Diameter Valve Spring for Mechanical Flat Tappet & Hydraulic Roller Lifter Cam
  • Spring Pressure Open: 550 lbs.
  • Spring Pressure Closed: 240 lbs.
  • Installed Height: 1.950''
  • Max Lift: .700''
  •   1.625'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 745 lbs.
  • Spring Pressure Closed: 255 lbs.
  • Installed Height: 2.050''
  • Max Lift: .800''
  •   1.645'' Diameter Valve Spring for Mechanical Roller Lifter Cam
  • Spring Pressure Open: 945 lbs.
  • Spring Pressure Closed: 330 lbs.
  • Installed Height: 2.100''
  • Max Lift: .875''
  • Items You Need