DFI 74726 - Accel Fuel Pressure Gauges
DFI#310-74726Fuel Pressure Gauge
Manufacturer's Part Number:
Rated 2 out of 5 by corvette joe from not the best bang for the buck I was surprised there were no instructions or paperwork in the box. it looks like the "L" shaped bracket in the kit relocated the MAP sensor aft and 90 degrees from normal, but I don't know for sure. moving the MAP sensor, and using the brass elbow adapter, oriented the gauge straight off the side of the schrader valve. I did not like this configuration on my 1990, L98 corvette, so bought a AN4, 90 degree elbow which allowed the MAP sensor to remain in it's stock location and positioned the fuel gauge between the sensor and the distributor. I had to notch the aluminum distributor cover to allow gauge clearance for proper viewing of the gauge, but overall, I liked this look better. the installation now looks good, and somewhat has that factory look. the gauge itself in fairly cheap, and sticks around the 5 psi mark when pressure bleeds off. I would have rather had a better gauge, and may opt for a liquid filled gauge down the road. so, the "L" bracket was not used, and ended up in the scrap box, the gauge is cheap, and about the only thing of decent quality is the brass elbow adapter. overall, for the money, I was somewhat disappointed in the kit, and cost me some extra money, but I got it installed to my satisfaction.
Date published: 2014-12-26