Power Package includes matching:
Performer Intake Manifold p/n 350-2156,
Edelbrock Performer 750cfm Carburetor p/n 350-1411
Performer-Plus Hydraulic Flat Tappet Camshaft & Lifters p/n 350-2157. Designed for 1965-79 street 326-455ci Pontiac V8s (except Ram Air V and 265/301 V8's). Provides great throttle response for performance you can feel. This intake manifold is a stock replacement/street legal part for 326, 350, 389, 400 and 455ci V8's with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR. (Intake manifold p/n 350-3756 is a stock replacement/street legal part for 326, 350, 389, 400 and 455ci V8's with OEM 4-bbl carb; 1973-79 with EGR.)
Installation Notes:
Port exit dimensions: 1.06'' x 1.92'' Manifold height: (A) 5.50'' , (B) 6.60''
Click here to determine carburetor pad height. Recommended intake gasket is Fel-Pro p/n 375-1233 For 1968-71 use p/n 350-8015 throttle bracket For Trans-Am use OEM 4-bbl carb for Shaker Hood clearance. Choke plate included. HEI will clear Carburetor Recommendations:
OEM 4-bbl. carburetor
carb will work with non-EGR system carb has provision for evaporative canister carb acceptable to factory cruise control Edelbrock Performer 600cfm Carburetor p/n 350-1405,
Edelbrock Performer 750cfm Carburetor p/n 350-1407
Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1805,
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.
carb will work with non-EGR system carb has no provision for evaporative canister, carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit carb has manual choke only. use square-bore to spread-bore carburetor adapter plate p/n 350-2732 Edelbrock Performer 600cfm Carburetor p/n 350-1406,
Edelbrock Thunder Series AVS 650cfm Carburetor p/n 350-1806
carb will work with non-EGR system carb has no provision for evaporative canister, use square-bore to spread-bore carburetor adapter plate p/n 350-2732 Edelbrock Performer 750cfm Carburetor p/n 350-1411.
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.
carb will work with non-EGR system carb has no provision for evaporative canister, carb requires p/n 350-8008 or p/n 350-8024 stud, nut & washer kit use square-bore to spread-bore carburetor adapter plate p/n 350-2732 Camshaft Specs:
*Note: Not legal for sale or use on pollution controlled motor vehicles.
| Duration Advertised: | 278° Intake / 288° Exhaust |
| Duration @ .050'' Lift: | 204° Intake / 214° Exhaust |
| Valve Lift: | .420'' Intake / .442'' Exhaust |
| Lobe Separation Angle: | 110° |
| Open/Close @ .050'' Cam Lift: | Intake - 3° ATDC (opens) / 27° ABDC (closes) Exhaust - 44° BBDC (opens) / 8° BTDC (closes) |