Small Block Chevy
Cam Notes: This camshaft works great when matched with Performer RPM Air-Gap intakemanifold p/n 350-7516, Thunder Series AVS carb p/n 350-1813, and Performer RPM E-Tec cylinderheads p/n 350-60979; this combo produces 435 HP / 435 ft.-lbs. of torque.
Use with high stall torque converter only.
Use only stock ratio rocker arms.
Operating Range | 1500-6500 RPM |
Duration Advertised | 296° Intake/300° Exhaust |
Duration @ .050'' | 234° Intake/238° Exhaust |
Lift @ Valve | .539'' Intake/.548'' Exhaust |
Lift @ Cam | .359'' Intake/.365'' Exhaust |
Lobe Separation Angle | 112° |
Intake Centerline | 107° |
Intake Timing @ .050" | Open 10° BTDC Close 44° ABDC |
Exhaust Timing @ .050" | Open 56° BBDC Close 2° ATDC |
INSTALLATION NOTES: Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7801.
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Specifications:
What length are these push rods ?
Will this kit work with stock 5.7 vortec heads or is it too much lift even woth springs ?
Are the dog bones included ? In the description it says retainers not included .
Is the cam in this kit billet or cast
What rocker arms do I need for this kit and timing chain ??
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.