Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 3756 - Edelbrock Performer Manifolds for Pontiac



Edelbrock 3756 - Edelbrock Performer Manifolds for Pontiac
Edelbrock 3756 - Edelbrock Performer Manifolds for Pontiac

JEGS Part Number: 350-3756

Performer Pontiac Intake Manifold
  • Pontiac 326-455ci
  • 4-bbl Spread-Bore Carb Flange (EGR)
  • Idle-5500 rpm

    Edelbrock 3756 Details

    Pontiac 326-455ci V8

    Designed for 1965-79 street 326-455ci Pontiac V8s (except Ram Air V and 265/301 V8's). Provides great throttle response for performance you can feel. This intake manifold is for 326, 350, 389, 400 and 455ci V8's with OEM 4-bbl carb; 1973-79 with EGR. (Intake manifold P/n 350-2156 is for 326, 350, 389, 400 and 455ci V8's with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR.)

    Installation Notes:

  • Port exit dimensions: 1.06'' x 1.92''
  • Manifold height: (A) 5.50'' , (B) 6.60''
    Click here to determine carburetor pad height.
  • Recommended intake gasket is Edelbrock p/n 350-7280
  • For 1968-71 use p/n 350-8015 throttle bracket
  • For Trans-Am use OEM 4-bbl carb for Shaker Hood clearance.
  • Choke plate included.
  • HEI will clear

    Carburetor Recommendations:
    OEM 4-bbl. carburetor

  • carb will work with EGR system
  • carb has provision for evaporative canister

  • Edelbrock Performer Manifolds for Pontiac

    IDLE-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 3756

    RPM Range
    Idle -5500
    Number Of Carbs
    One
    Emission
    With EGR
    Engine Make/Size
    Pontiac 326-455
    Cylinder Head Type
    Standard
    Usage
    Street/Hi-Performance
    Position
    N/A
    Basic Operating RPM Range
    Idle-5,500
    Carburetor Quantity
    One
    Engine Block Style
    Stock/OEM standard deck
    Intake Finish
    Natural
    Intake Material
    Aluminum
    Intake Section Included
    Complete
    Intake Style
    Dual plane
    Quantity
    Sold individually
    EGR
    Yes
    Manufacturer's Part Number:
    3756
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.07

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $3.99

    JEGS Performance Products 15842 - JEGS Carburetor Stud Kits
    Only $6.09

    JEGS Performance Products 15845 - JEGS Carburetor Stud Kits
    Only $8.99


    See All Items You Need