FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 37761 - Edelbrock Performer Manifolds for Chrysler

Edelbrock 37761 - Edelbrock Performer Manifolds for Chrysler

Edelbrock#350-37761

Performer 318/360 Intake Manifold
  • SB-Chrysler 318-360ci 1972-86
  • 4-bbl Spread-Bore Carb Flange (EGR)
  • Idle-5500 rpm
  • Polished Finish
    • Fits Applications:
    • 1972
      CHRYSLER
      1974-1983
      CHRYSLER
      1972-1986
      DODGE
    • Click to see All

    Edelbrock 37761 - Edelbrock Performer Manifolds for Chrysler Details

    Chrysler 318-360ci Small Block V8

    Designed for street 318-340-360ci Chrysler V8s. This intake manifold is for same V8's with OEM 4-bbl carb; 1972-87. (Intake manifold p/n 350-2176 is for 318-360ci V8s with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR.) This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.

    Installation Notes:

  • Port exit dimensions: .97'' x 1.95''
  • Manifold height: (A) 4.13'' , (B) 5.13''
    Click here to determine carburetor pad height.

    Carburetor Recommendations:
    OEM 4-bbl. carburetor

  • carb will work with EGR system
  • adapter for this carb supplied with manifold
  • carb has provision for evaporative canister
  • Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841
  • carb requires automatic transmission rod extension kit p/n 350-8003 for 1/4'' rod or p/n 350-8004 for 5/16'' rod. Also use transmission kick-down linkage adapter kit p/n 350-8022 for 1977 vans
  • carb acceptable to factory cruise control

  • Edelbrock 37761 - Edelbrock Performer Manifolds for Chrysler

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Edelbrock 350-37761

    RPM Range
    Idle -5500
    Engine Make/Size
    Mopar 318-360
    Number Of Carbs
    One
    Emission
    With EGR
    Usage
    Street/Hi-Performance
    Cylinder Head Type
    Mopar 318
    Cylinder Head Type
    Mopar 340/360
    Position
    N/A
    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    Mopar Performance P4876373 - Mopar Performance Bypass Hose & Fittings
    Only $17.99

    Mopar Performance P4876374 - Mopar Performance Bypass Hose & Fittings
    Only $26.99

    Mopar Performance P4876374K - Mopar Performance Bypass Hose & Fittings
    Only $44.98

    Edelbrock 4495 - Edelbrock Signature Valve Covers
    Only $47.99


    See All Items You Need