FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Edelbrock 3887 - Edelbrock Ford 5.8L EFI Manifolds

Edelbrock 3887 - Edelbrock Ford 5.8L EFI Manifolds

Edelbrock#350-3887

Victor Ford 5.8L
  • Complete

    Edelbrock 3887 - Edelbrock Ford 5.8L EFI Manifolds Details

    Small Block Ford Victor EFI

    Installation Notes
  • Complete kit includes Upper Plenum with Plenum Cover, Lower Manifold Base and Gasket Set 350-7232 (includes base-to-upper and plenum cover gaskets)
  • Manifold Overall Height: 11.58"
  • Port Exit Dimensions: 1.20" Wide x 2.0" Tall
  • Recommended intake gasket; Fel-Pro 375-1262, Fel-Pro 375-1262R or Jegs 555-210201
  • Recommended Throttle Body: Edelbrock 75mm Throttle Body 350-3826
  • Recommended cylinder heads: Edelbrock Victor Jr. 350-77189 or Victor 350-77219
  • 1994-95 Mustangs require Edelbrock Adapter Kit 350-8025, Throttle Body Adapter 350-3835 and Strut Tower Brace 350-5225
  • May not clear stock hoods

  • Edelbrock 3887 - Edelbrock Ford 5.8L EFI Manifolds

    5.8L EFI Engine Swap Power!

    Performer 5.8L (Idle-5500 rpm) The Performer 5.8L aluminum intake manifold base allows you to install a 351W engine in a 1986-93 5.0L Mustang while retaining the reliability and convenience of fuel injection. Use your stock factory or Edelbrock Performer upper intake for the best performance.

    Performer 5.8L RPM II (1500-6500 rpm) The Performer 5.8 RPM II manifold has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip applications. This manifold consists of a V-shaped crossover with an increasing crosssectional area, which passes over to eight large tapered runners. The upper manifold is powder-coated light titanium gray. The base manifold has a rear PCV compatibility for Mustang applications.

    Victor Ford 5.8L EFI: (4000-7500 RPM) Designed for 351W based competition engines, the Victor 5.8L EFI manifold is capable of supporting over 700 HP! The new Victor Ford 5.8L manifold is designed for engine displacements of up to 427ci. It features out race winning air-gap design which isolates the intake charge from the engine heat that is present in the lifter valley. The 12.5'' runner length is optimized for sustainable power levels at 7500+ RPM. Accepts 302 Mustang fuel rails with extended crossover. The upper section is power coated titanium gray.

    Edelbrock 350-3887

    RPM Range
    4000-7500
    Engine Make/Size
    Ford 5.8L/351W
    Number Of Carbs
    None, For Fuel Injection
    Emission
    Without EGR
    Cylinder Head Type
    Standard
    Usage
    Racing
    Position
    N/A
    Edelbrock 8728 - Edelbrock 5.0L/5.8L Intake Manifold Spacers
    Only $124.99

    JEGS Performance Products 15840 - JEGS Carburetor Stud Kits
    Only $5.99

    JEGS Performance Products 15841 - JEGS Carburetor Stud Kits
    Only $6.99

    JEGS Performance Products 15842 - JEGS Carburetor Stud Kits
    Only $6.99


    See All Items You Need