1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Edelbrock 60049

Edelbrock Buick Performer RPM Cylinder Heads

Edelbrock 60049

350-60049

made in usa
jegs shipping
FREE Shipping
Ships 12/15/16 if Ordered Today
Edelbrock 60049 Edelbrock Buick Performer RPM Cylinder Heads $1,072.80
Buick Performer RPM Cylinder Head
  • 400-455ci
  • 215cc Intake Ports
  • 68cc Combustion Chambers
  • 2.125"/1.75" Valves
  • 1.55" Valve Springs
  • Max Lift: .600"
  • 3/8" Rocker Stud
  • No Exhaust Crossover Port
  • Assembled, Sold Each

  • Edelbrock 60049 Details

    Buick Performer RPM Aluminum Cylinder Heads

    Technical Notes: Sold individually. Requires the use of hardened pushrods. Bare heads will have valve guides and seats installed, but will require final sizing and valve job to match the valves you will be using. Match with Edelbrock head gasket sets.

    Specifications:

    Emission
    50 State Legal
    Engine Make/Size
    Buick 400-455
    Type
    Complete
    Usage
    Street/Performance
    Cylinder Head Type
    Standard
    Preparation
    Bolt On (Not Required)
    Finish
    Cast Aluminum
    Accessory Bolt Holes Drilled
    Yes
    CNC-Machined Combustion Chamber
    No
    CNC-Machined Exhaust Runner
    No
    CNC-Machined Intake Runner
    No
    Combustion Chamber Volume (cc)
    68
    Cylinder Head Finish
    Natural
    Cylinder Head Material
    Aluminum
    Cylinder Head Style
    Assembled
    Damper Spring Included
    Yes
    Exhaust Port Location
    Standard
    Exhaust Port Shape
    Rectangular
    Exhaust Runner Volume (cc)
    130
    Exhaust Valve Diameter (in.)
    1.75
    Exhaust Valves Included
    Yes
    Guideplates Included
    Yes
    Heat Crossover
    No
    Intake Port Location
    Standard
    Intake Runner Volume (cc)
    215
    Intake Valve Angle
    15
    Intake Valve Diameter (in.)
    2.125
    Intake Valves Included
    Yes
    Lock Style
    7 degree
    Locks Included
    Yes
    Machined for O-Ring
    No
    Maximum Valve Lift (in.)
    0.6
    Number of Springs Per Valve
    Single
    Oiling Style
    Through pushrod
    Outside Diameter of Outer Spring (in.)
    1.55
    Quantity
    Sold individually
    Retainer Material
    Steel
    Retainers Included
    Yes
    Rocker Arm Nuts Included
    No
    Rocker Arm Studs Included
    Yes
    Rocker Arms Included
    No
    Steam Holes Drilled
    No
    Valve Cover Mounting Style
    Perimeter bolt
    Valve Guide Material
    Manganese bronze
    Valve Guides Included
    Yes
    Valve Seat Machine Style
    3-angle
    Valve Seat Material
    Ductile iron
    Valve Seats Machined
    Yes
    Valve Springs Included
    Yes
    Valve Stem Seal Style
    Positive stop
    Valve Stem Seals Included
    Yes
    Manufacturer's Part Number:
    60049

    Designed for 400, 430 and 455ci Buick engines, these Performer RPM cylinder heads are available fully assembled and ready to bolt on or bare for use with your own valve train components.

    Features include high-quality stainless steel 2.125" intake and 1.75" exhaust valves, 68cc combustion chambers and high flow 215cc intake and 130cc exhaust ports. Intake and exhaust runners are hand blended in the bowl area and the intake entries and exhaust exits are CNC profiled for increased air-flow. These heads include adjustable rocker stud and guide plate set-up for use with small-block Chevy 1.6:1 style adjustable rockers.

    The casting is manufactured of A356 aluminum and heat treated to T6 spec for superior quality. An extra-thick 5/8" deck and Heli-coil threaded inserts offer improved durability. Made In The USA!

    Features:
  • Combustion Chamber Volume: 68cc
  • Intake Runner Volume: 215cc
  • Exhaust Runner Volume: 130cc
  • Intake Valve Diameter: 2.125"
  • Exhaust Valve Diameter: 1.75"
  • Valve Stem Diameter: 11/32"
  • Valve Guides: Manganese Bronze
  • Deck Thickness: 5/8"
  • Valve Spring Diameter: 1.55"
  • Vavle Spring Maximum Lift: .600"
  • Rocker Stud: 3/8"
  • Guideplate: Hardened Steel
  • Pushrod Diameter: 3/8"
  • Valve Angle: 15°
  • Exhaust Port Location: Stock
  • Spark Plug Fitment: 14mm x 3/4 Reach, Gasket Seat
  • Made In The USA:

    Technical Notes: Sold individually. Requires the use of hardened pushrods. Bare heads will have valve guides and seats installed, but will require final sizing and valve job to match the valves you will be using.

  • Items You Need