Edelbrock 71054 - Edelbrock Performer RPM Manifolds & Kits for Ford

Edelbrock #350-71054

Performer RPM FE Intake Manifold

Endurashine Finish

Ford FE 332-428ci

4-bbl Square-Bore Carb Flange (non-EGR)

1500-6500 RPM Range

Accessories

Installation Instructions for Edelbrock 71054 - Edelbrock Performer RPM Manifolds & Kits for Ford

Dyno Chart for Edelbrock 71054 - Edelbrock Performer RPM Manifolds & Kits for Ford

Share |

Complete list of Edelbrock Performer RPM Manifolds & Kits for Ford

Details
Overview
Accessories

Edelbrock 71054 - Edelbrock Performer RPM Manifolds & Kits for Ford Details

Ford 332-428ci FE V8

Designed for high-performance street 390-406-410-427-428ci Ford FE V8's with standard 390-428ci, 427ci low/medium-rise or Edelbrock Performer RPM FE cylinder heads. The dual-plane constant cross-sectional area design builds low and mid-range acceleration while optimized runner paths make exceptional top-end horsepower. The Performer RPM FE will accept square-bore carburetors and has a provision for adding the PCV or breather flange at rear. No exhaust crossover passage.

Installation Notes:

Port exit dimensions: 1.16'' x 1.97''

Manifold height: (A) 4.89'' , (B) 6.04''; Carb pad height = 5.465'' Click here to determine carburetor pad height.

Recommended intake gasket: JEGS p/n 555-210300.

Use bolt kit Edelbrock p/n 350-8507.

Carburetor Recommendations:
Edelbrock Performer 750cfm Carburetor p/n 350-1407
Edelbrock Performer 800cfm Carburetor p/n 350-1412
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1812.

carb will work with non-EGR system

carb has no provision for evaporative canister,

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb acceptable to factory cruise control.

carb has manual choke only.

use throttle lever adapter p/n 350-1483 for 1968-later vehicles.

Edelbrock Performer 800cfm Carburetor p/n 350-1413
Edelbrock Thunder Series AVS 800cfm Carburetor p/n 350-1813.

carb will work with non-EGR system

carb has no provision for evaporative canister,

Use stud, nut, and washer kit: JEGS 1-1/2'' stud kit p/n 555-15840 or JEGS 2'' stud kit p/n 555-15841

carb acceptable to factory cruise control.

use throttle lever adapter p/n 350-1483 for 1968-later vehicles.

1500-6500 RPM Power!

For the ultimate in street performance bolt on an Edelbrock Performer RPM manifold. These dual plane, high-rise intakes make incredible horsepower to 6500 rpm along with streetable torque for great throttle response. This broad power band makes Performer RPM ideal for street or strip. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions-equipped engines. Performer RPM manifolds match Performer RPM camshaft and cylinder heads for outstanding performance.