FITech Fuel Injection 30064 Go EFI 2x4 1200 HP Power Adder Throttle Body System Basic Kit
546-30064
Items You Need
Basic Kit
FiTech30064 Go EFI 2x4 1200 HP Power Adder Throttle Body System Basic Kit
The Go EFI 2×4 Power Adder 1200HP Matte Black Self-Tuning Fuel Injection system is rated at 1200hp but is suitable for engines from 400hp thru 1200hp. This Kit is for the guys who have 671 and 871 roots superchargers or make up to 1200hp naturally aspirated on their dual quad setup. FiTech EFI has made it simple with their Go EFI 2×4 Power Adder 1200hp self-tuning system. Works out of the box on your 2×4 blower plate as an inline setup or can be side mounted using custom linkages. Also, this kit is a bolt on for the most popular normally aspirated dual quad and tunnel ram manifolds including the Edelbrock line of dual quad manifolds without any adapters! They fit and look like they belong there because they were designed to fit from the start. One throttle body handles all of the brains while the second holds 4 additional injectors. These can also be used in cross ram and tunnel ram configurations.
Hand-Held Controller Quick Start Guide
Features:
- Two 4-Injector Boost Ready Throttle Bodies in Matte Black Finish
- Fits Inline on 2x4 Blower Manifolds, Dual Quad Manifolds and Tunnel Ram Manifolds (linkage and fuel line NOT included)
- Boost Ready ECU 2.5 Bar Internal MAP Sensor (25 psi)
- Nitrous Control with Safety Features and Accessories for Nitrous Tuning
- Nitrous and Boost Specific Target Air Fuel Ratio Target Options
- Boost and Nitrous Timing Retard Strategies
- Two Fan Controls (can set at separate temperatures)
- Air-Conditioning Idle Speed Input Kick Up
- Advanced Hand-Held Tuning Mode
- Pro Laptop Software
- 8-Injectors Capable of Flowing 1200 HP of Fuel (1000 HP Boosted)
- Built-in Fuel Pressure Regulator
- Self-Tuning
- Basic Install with Only 4 Wires and 2 Sensors
- Bosch 4.2 Wide Band O2 Sensor
- Compact Externally Mounted ECU on the Throttle Body
- Voltage Control Fuel Pump Control
- Wet Flow Technology
- Swirl Spray Annular Discharge Design
- Inlet Fitting: 9/16 in. -24 to 6AN
- Return Fitting: 10 mm x 1.25 to 6AN
Note: Not legal for use on pollution controlled vehicles. This system is designed to be retrofit into vehicles that do not require emission controls.
- Applications: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 250 HP up to 1200 HP with a dual quad intake manifold.
- Replacement for any dual quad carburetors for engines with 250 HP up to 1200 HP.
- Use the same size air cleaner you would normally use for your dual quad carburetors.
Specifications:
I want to use a Edelbrock C-66 dual quad manifold. First, does a dual plane manifold work well for EFI? Second, should I use a linear throttle linkage, or a progressive for the rearmost throtte body?
I have a nitrous Foxbody with a Hoyts custom tunnel ram on a smallblock @ a little over 1000HP. Basically having open headers. Will this work for my application, not a street vehicle.
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.