FITech Fuel Injection 31003 Go Street 400HP Cast EFI System with Inline Fuel Delivery Master Kit
546-31003
Product Q&A
View Now
| Ratings |
|---|
| Price |
| Brand |
Master Kits
FiTech 31003 Go Street 400HP Cast EFI System with Inline Fuel Delivery Master Kit
The Go Street 400HP EFI combined with the Inline Fuel Pump Fuel Delivery Kit is a ready-to-run system that strays away from the programmable features and sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. FiTech once again allows you to ditch that old carburetor and advance into the EFI world at the most affordable price on the planet! Leave it to the experts in affordable EFI, FiTech is always looking for ways to save their customers money while delivering the BEST performance possible!
The Inline Fuel Pump Fuel Delivery Kit includes an EFI grade 255 L/PH inline external fuel pump that is suitable for engines making up to 600HP. (Note that some of our EFI kits are limited to less than 750HP due to maximum usable injector sizes). This kit also includes 40-feet of EFI grade fuel hose suitable for both the inlet and return lines between the fuel tank and the engine. The kit includes two billet fuel filters. The filters include a 60-micron pre-filter and a 30-micron post filter.
Hand-Held Controller Quick Start Guide
Features:
- Self-learning technology
- Four flow-matched 62-lb injectors
- Supports up to 400 HP
- EZ-tach input reads tach signal from Coil, HEI, MSD/CDI and aftermarket ignitions (no timing control)
- Bosch 4.2 wideband O2 sensor
- 1 BAR internal MAP sensor
- On-board fuel pump driver
- Annular discharge design
- Built-in pressure regulator
- Hand-held tuning module
- Single fan control and AC input (Kicks up Idle)
- Inlet fitting: 9/16 in.-24 to 6AN
- Return fitting: 10 mm x 1.25 to 6AN
- Includes FiTech Go EFI In-line Fuel Pump Kit 546-50001
- Notes:
- Not legal for use on pollution controlled vehicles. This system is designed to be retrofit into older vehicles that do not require emission controls.
- For non-boosted engines - Normally aspirated applications only
- Applications: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 150 HP up to 400 HP with a 4-barrel intake manifold.
- Replacement for any 4-barrel carburetors for engines with 150 HP up to 400 HP.
- Use the same size air cleaner you would normally use for your 4-barrel carburetor.
Specifications:
will this system work with my chevys stock distributor?
I have an 85 Dodge w250. does this kit work with the throttle kickdown linkage on the 727 transmission?
I have dual exhaust, how does the O2 feed back sensor work correctly if it is tapped into just one bank?
I have a BBC 455 hp which kit do I need ?
Can you give me a budget price to post to new Zealand post code 4310
Can I use my stock fan instead of electric fans 1975 corvette?
73 Cougar with 351c and FMX auto trans. Is there a place for the trans kick down rod to attach to?
I have a 1962 Chevy I6 235 willl be on a 4 bbl Clifford intake will this work
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.