FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Ford Racing M-7600-B - Ford Racing Roller Pilot Bearings

Ford Racing M-7600-B - Ford Racing Roller Pilot Bearings

Ford Racing#397-M-7600-B

Roller Pilot Bearing
  • Fits 4.6L/5.4L/5.0L 4V TIVCT Modular Engines

    Ford Racing M-7600-B - Ford Racing Roller Pilot Bearings Details

  • Production roller pilot bearing fits 4.6L/5.4L modular engines

    NOTE: Pre-greased - do not add extra grease. Clutch and bearing damage may occur

  • Ford Racing M-7600-B - Ford Racing Roller Pilot Bearings

    Ford Roller Pilot Bearing

    Ford Racing Transmission Input Shaft Roller Pilot Bearings are the perfect solution to reduce friction and heat on your input shaft and crankshaft. The pilot bearing will make shifting at high RPM's easier and will increase the life of your current or newly installed clutch. These sealed pilot bearings are pre-greased and ready to install.

    To insure a long life out of your pilot bearing make sure your bell housing is properly indexed to the crankshaft. Bearings do not run properly for very long if you put excessive side loading on them. Roller bearing are also only recommended for later model transmissions that's reduced tolerances require ATF for lubrication rather than gear oil. Older style transmissions with increased tolerances may also put excessive side loading on the bearing drastically reducing the bearings service life.Made in USA.

    Features
  • Reduces Heat and Friction
  • Makes High RPM Shifting Easier
  • Recommended for Late Model ATF Fluid Transmissions

  • Ford Racing 397-M-7600-B

    Manufacturer's Part Number:
    M7600B
    JEGS Performance Products 80530 - JEGS Flywheel Turning Tool
    Only $24.99

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69