Items You Need
Engine Control (ECU)
FuelTech 2002006505 is a complete plug-and-play harness and is the only required harness for a 4-cylinder application when using the FuelTech FT450. When using or upgrading to the FuelTech FT550 or the FT550LITE and in order to utilize all of the extra inputs and outputs, the 2002006600 Universal "B" expansion harness is also required.
FuelTech 2002006505 Pre-Wired Connectors:
- (4) EV1-Style Fuel Injectors such as FuelTech Low-Impedance Peak-and-Hold Injectors (or equivalent) wired in semi-sequential
- (1) FuelTech Peak-and Hold Injector Driver (4 injectors)
- When using high-impedance injectors a peak-and-hold driver is not required, only the included bypass connector
- (4) IGN1A Smart Coils wired in waste spark
- (1) FuelTech WB-O2 Nano wideband oxygen sensor display and conditioner
- (1) GM-style intake air temperature sensor such as FuelTech 5005100015 (or equivalent)
- (2) Pressure sensors for fuel, oil, or any 0-5 volt sensor such as FuelTech 5005100021 (or equivalent)
- (1) GM-style engine temperature sensor such as FuelTech 5005100016 (or equivalent)
- (1) Extra output for generic use
- (3) Power relays (fused relays included w/harness)
- Crankshaft and camshaft sensor ready with both hall-effect and variable reluctance (VR) ready
Note: To activate coils and injector relays the blue number 6 output must be configured as a fuel pump or RPM activation
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.