12 Days of Christmas
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

JEGS Performance Products 63028

Hydraulic Brake Lock Includes Adapter Fittings for 3/16" Brake Line

JEGS Performance Products 63028

555-63028

jegs shipping
Ships
JEGS Performance Products 63028 Hydraulic Brake Lock Includes Adapter Fittings for 3/16" Brake Line $32.99
Hydraulic Brake Lock
  • Includes Adapter Fittings for 3/16" Brake Line
  • Black Anodized Aluminum

  • Uses hydraulic line pressure to temporarily hold brakes. Unit must be mounted in a location that is easy to reach from the driver's seat while pressing on the brake pedal so that you can set the lock. The most common use is on the rear brakes.

    No special linkage required. Not recommended for use with silicone brake fluid, or as an emergency brake. Includes two brass adapter fittings for use with standard 3/16" inverted flare style brake line.

    Operation:
    To Set Lock - Press on the brake pedal, push the knob down & release brake pedal.
    To Release Lock - Step on the brake pedal slightly harder than before and it will release automatically.

    63028 - JEGS Hydraulic Brake Lock is rated 3.8 out of 5 by 9.
    • y_2016, m_12, d_9, h_17
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_9
    • loc_en_US, sid_10001_10001_1733620, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Rated 5 out of 5 by from brake lock this product works great it looks good where it mounted easy access press the brake push the button and the brakes set push the brake again and they release and they don't bleed off it will stay locked till you release them .
    Date published: 2014-11-01
    Rated 1 out of 5 by from not for me. bought this product about a month or so age . i have hydro boost brakes & this may be the problem.. put on two valves front/rear both valves were sticking & did not release well had to stand on brakes & pull up (hard) to release , after 1 week front valve was working good then it blew out the oring & started leaking. rear valve still stiff & hard to work..
    Date published: 2016-05-04
    Rated 1 out of 5 by from Piece of junk This should be a very simple device. The first one did Not close off the flow at all, in either direction. Jeffs overnighted another and had same exact issue. I returned them both and bought a very similar device from Jamar. It worked perfect first try.. I informed Jegs of the possible production problem
    Date published: 2016-06-06
    Rated 4 out of 5 by from It's simple, but it sort of leaks. I'm happy I saved by going the simple route, since that's the theme of my build. I had an issue with the inlet leaking, so I replaced the bit with one I had in my toolbox and it seemed to fix it.
    Date published: 2015-06-14
    Rated 5 out of 5 by from temporary parking brake I needed a parking brake for my 1949 Plymouth when I put a mustang t5 transmission in it. Originally had parking brake on rear of Plymouth trans.
    Date published: 2015-06-05
    Rated 5 out of 5 by from Haven't tried it yet. Taking it out of the country for use in Central America. It does look great, just hope it works like it's supposed to.
    Date published: 2016-08-31
    Rated 5 out of 5 by from Works perfect! Bought this for use as an e-brake and works perfectly. For the price an easy installation you couldn't find a better option
    Date published: 2014-12-29
    Rated 3 out of 5 by from will not lock I bought this recently and it does not work properly it will not lock in the any position
    Date published: 2015-12-29
    • y_2016, m_12, d_9, h_17
    • bvseo_bulk, prod_bvrr, vn_bulk_0.0
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_9
    • loc_en_US, sid_10001_10001_1733620, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_jegs
    Items You Need