- Vacuum Port Fittings
- Fuel Rail Kit
- Intake Seals
- Hardware
Items You Need
Ratings |
---|
Price |
Brand |
Ford
Dimensions:
- Front Height: 9.0625"
- Rear Height: 8.875"
- Front Intake Bolt to Intake Front: 4"
- Rear Intake Bolt to Intake Rear: 0.5"
- Intake Runner: 1.98" Diameter x 6.5" Long
- Intake Flange: 1.95" Thick
- Throttle Body Opening: 133mm x 60.8mm
Note:
- Designed for high performance engine applications with maximum engine speeds of 6800-7400 rpm
- Intended for maximum performance applications and will not accept stock components and hardware
- A modified hood will be required for most vehicle applications
- To be used with the Ford factory style 60mm twin bore throttle bodies
- Includes Vacuum port fittings that will allow the installation of a MAP sensor:
- (1) 1/8"-28 x 1/4" Hose
- (1) 1/8"-28 x 5/16" Hose
- (1)1/8"-28 x 7/16" Hose
- (1) 1/4"-19 x 1/2" Hose
Emissions Note:
This part is only legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles or on vehicles used solely for the purposes of closed competition racing.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Will this work for a boosted application?
Will this work with the steeda charge motion delete plates?
Will this work with stock throttlebody? Also will stock injectors fit with the included fuel rail kit amd will there have to be any fabricated . Car will have a turbo so also how much boost will it hold ?
Will this work with my stock throttle body? Will I need a new tune? What is the expected power gain with this intake. What else will be needed for the install? And how tall of a good is needed?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.