Items You Need
Magnum Cylinder Heads with "LA" Intake Holes
Note: Outflows stock and Magnum R/T cylinder heads (no longer available from Mopar)
This cylinder head is a stock replacement on 1992-2001 5.2L Magnum and 1993-2003 5.9L Magnum engines. It can also be used on 1964-1991 small block Mopar engines, but must be used with the following conversion parts:
- Flat top or dished pistons (small 62 cc closed chamber on head)
- 10-Bolt Magnum Valve Covers 312-P5007611AB & Gasket 312-P5249660
- Magnum Rocker Arms 312-P4876050 (8 required) or Similar
- Hollow Tube Style 5/16" Hardened Pushrods (oils heads) with Approx. Length = 7.625"
- Hydraulic Flat Tappet Style Camshaft
- AMC V8 Style Tappets with Oil Passage (oils heads) 312-P4529220AB or Similar (for hydraulic flat tappet cam only)
- 1964-1991 Small Block Intake Manifold
- Intake Manifold Gasket Set 312-P4876049, 326-615-310, or 350-7277
- Head Bolt Set 555-83446
Minor machining may be required for pushrod & rocker arm clearance. The pushrods and tappets must have hollow oil passages since Magnum heads are oiled through these components.
Can you swap these heads on to a 88 318 with the 302 casting heads? Also can you use a hydraulic roller cam with these heads
Hi, does these heads have bronze guides??
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.