Items You Need
Mopar A-Body
Standard Disc Brake Conversion Kits
JEGS 555-631930 Standard Front and Rear Disc Brake Conversion Kit
JEGS 631930 Front and Rear Disc Brake Conversion Kit will provide the latest braking technology for the 1962-1972 Dodge Dart, 1962-1972 Plymouth Valiant, 1970-1972 Plymouth Duster & 1971-1972 Plymouth Scamp. This kit is easy to install and includes all the necessary components to convert from drum to disc brakes.
JEGS 555-631930 Standard Front and Rear Disc Brake Conversion Kit Includes:
- (2) Front, 11 in. Diameter Standard Plain Rotors with Small 5 x 4 in. Bolt Pattern
- (2) Rear, 11 in. Diameter Standard Plain Rotors with Multi-Drilled 5 x 4 in. & 5 x 4.50 Bolt Patterns
- (1 Pair) Front, Large Single Piston Kelsey Hayes Slider Type Disc Brake Calipers, Black Powder Coat Finish with MKD84 Brake Pads
- (1 Pair) Rear, Large Single Piston Emergency Brake Calipers, Black Powder Coat Finish with MKD154 Brake Pads
- (4) Rubber Brake Hoses with Banjo Bolts and Copper Washers
- (2) Front Inner Wheel Bearing Sets
- (2) Front Outer Wheel Bearing Sets
- (2) Front Wheel Bearing Grease seals
- (2) Front Dust Caps
- (2) Front Spindle Nuts and Washers
- (2) Front Cotter Pins
- (1) Front, Package of Caliper Bracket Mounting Bolts and Lock Nuts
- (1) Front Spindle, Left/Driver Side (Stock Height)
- (1) Front Spindle, Right/Passenger Side (Stock Height)
- (1 Pair) Front Caliper Brackets
- (1 Pair) Rear Caliper Brackets
- (1 Pair) Front Lower Steering Arm Assemblies with Ball Joints
- (1 Pair) Front Upper Ball Joint Adapters
JEGS 555-631930 Standard Front and Rear Disc Brake Conversion Kit Notes:
- This Kit Fits the Small 5 x 4 in. Bolt Pattern Only
- The Rear Rotors Will Not Fit 14 in. Diameter Wheels
- The Front Rotors Will Fit the Factory's Original 14 in. Diameter Wheels
- Front Rotors Will Not Fit These Wheels: Factory Steely Wheels, Cragar SST Steel Wheels, Year One Rally Wheels, or any 14 in. Diameter Wheel that was Originally used on Rear Axles with Smaller than 10 in. Diameter Brake Drums
- By installing this kit you do not have to replace the upper control arms like other kits on the market. The kit includes adapters to make the smaller upper ball joints fit the spindles that are included
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.