FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

KBS Coatings 4402 - KBS Coatings RustSeal Rust Preventive Coating

KBS Coatings 4402 - KBS Coatings RustSeal Rust Preventive Coating

KBS Coatings#191-4402

RustSeal Rust Preventive Coating
  • 1-Quart
  • ORMD Item - Ground Shipping Only

    KBS Coatings 4402 - KBS Coatings RustSeal Rust Preventive Coating

    RustSeal is a single-component, ready-to-use, high-solid content, rust preventive coating with exceptional properties. It is specifically formulated to stop and encapsulate existing rust and corrosion. This extremely tough, flexible coating is highly resistant to mechanical abrasion and impact, guarding against abuse and therefore keeping the substrate completely sealed and the moisture permanently locked out. It is also highly resistant to most aggressive chemicals, including most acids, alkalis, salt, abrasive materials, fertilizers, solvents, oil and refined petroleum products.

    RustSeal wets and penetrates the surface down to the origin of the rust. It combines with atmospheric moisture to start the curing process of the resins by expanding and interlocking within the pores of the rust. This unique process literally enables the coating to galvanize itself to the substrate, becoming an integral part of the surface. It completely seals the surface, totally blocking all the pores and preventing all access of moisture, air and water vapor.

    Unlike other rust paints, RustSeal is a single-component product, so there are no mixing ratios involved. In addition, once cured, RustSeal can be top-coated with any top-coat system you choose. RustSeal is capable of adhering to nearly any prepared substrate and may be used as a lead-based paint encapsulation in environmental conditions of 0-500 F degrees. RustSeal has moderate UV stability and can withstand direct sunlight for months without chalking unlike other competitors.

    This is the third and final step in permanent rust protection. KBS Coatings recommends first cleaning soiled or rusted surfaces with AquaKleen to remove any oils, grime or dirt. This will allow the second step, RustBlast to fully remove rust, corrosion or tarnish and leave a gently etched surface. The third and final step is to coat the surface with RustSeal to prevent any future rust or corrosion.

    Features :

  • Apply directly over rust
  • High solids content
  • Single-component formula
  • Withstands temps up to 600F° (316C°)
  • High abrasion & chemical resistance
  • Seals & encapsulates rust & porous surfaces
  • Remains flexible to expand & contract
  • Self-leveling: Brush, Roll or Spray
  • Compatible with all paint systems
  • VOC compliant
  • Moderate UV stability

  • Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69