12 Days of Christmas
1-800-345-4545
FREE SHIPPING!
Orders Over $95
Same Day Shipping Before 11 PM ET
0
My Cart
$0.00
Shop By Vehicle
Shop By
Category
All Categories

Rebates
Gift Certificates
My Account
E-Mail Signup
Catalog Request
Help

Lakewood 15335

Blowproof Bellhousing 1959-78 Chrysler 383/413/426/440

Lakewood 15335

620-15335

made in usa
jegs shipping
FREE Shipping
Ships 12/12/16 if Ordered Today
Lakewood 15335 Blowproof Bellhousing 1959-78 Chrysler 383/413/426/440 $720.95
Blowproof Bellhousing
  • 1959-78 Chrysler 383/413/426/440
  • New Process A-833, T18, 420, 435, 456, 2300, 4500
  • Mechanical Linkage
  • Requires 143 Tooth Flywheel

  • Lakewood 15335 Details

    Chrysler

  • Fits pre-1999 4500 transmission
  • 7.50'' Depth with Block Plate
  • 3.12'' x 4.00'' Fork Opening
  • 5.600'' Bore Diameter

  • Specifications:

    Clutch Fork Included
    No
    Bellhousing Material
    Steel
    Block Plate Included
    Yes
    Adjustable Fork Pivot Recommended
    No
    Bellhousing Bore Diameter (in.)
    5.125
    Bellhousing Depth (in.)
    7.5
    Bellhousing Finish
    Red enamel
    Bellhousing Type
    New
    Quantity
    Sold individually
    SFI-Approved
    Yes
    Safety Rating
    SFI 6.1
    Manufacturer's Part Number:
    15335

    Minimize the Destructive Effects of a Clutch/Flywheel Explosion
    Manufactured from premium 1/4" steel, Lakewood Bellhousings utilize hydroforming. This hydraulic forming process minimizes the thinning of the bellhousing's material while maintaining proper thickness in critical areas. Units are stress relieved after forming for even greater strength and then finished with a safety red enamel.

    Tested to meet or exceed SFI Specification 6.1W when used with an approved block plate, Lakewood Steel Bellhousings are designed to contain a clutch or flywheel explosion with possible deformation or elongation of the housing. All bellhousings include the block plate and an SFI Spec 6.1W serial number.

    Features
  • For passenger vehicles as noted
  • Hydroformed steel yields a uniform 1/4" thickness
  • Precision drilling guarantees proper bolt hole spacing
  • Blanchard ground mounting surfaces provide exact engine-transmission alignment
  • MIG welded thread inserts for transmission bolt pattern and clutch adjustment pivot ball
  • Block plate included (units predrilled for full-containment block plates)
  • SFI specification accepted by most major race sanctioning bodies
  • Heavy-duty clutch linkage brackets where required

    JEGS Easy Kits are designed by JEGS professionals so you get all the parts you need.

    Click Here for Lakewood Bellhousing Application Guide

  • Does Lakewood 15335 fit your vehicle?

    Narrow Results

    1970 DODGE CORONET

    • CC: 6981
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: 440
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1971 DODGE CHARGER

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: SPECIAL EDITION
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1967 PLYMOUTH GTX

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1973 PLYMOUTH GRAN FURY

    • CC: 7212
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1966-1968 DODGE CHARGER

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1966 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1965-1967 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: 500
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1971 DODGE CHARGER

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: SUPER BEE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1962 DODGE 880

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • EngineType: ALL
    • SubModel: ALL

    1970-1971 PLYMOUTH GTX

    • CC: 7212
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1975-1977 PLYMOUTH GRAN FURY

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BROUGHAM
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1974 DODGE M300 (CHASSIS)

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1968 DODGE DART

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: GTS
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1961 CHRYSLER NEWPORT

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1965-1967 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: 440
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1971 DODGE CORONET

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: CUSTOM
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1967-1969 CHRYSLER NEW YORKER

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1970 DODGE CORONET

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: 500
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1976-1978 DODGE B200 VAN

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: SPORTSMAN
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1962 DODGE POLARA

    • CC: 5917
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1975-1978 DODGE MONACO

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1969 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: 440
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1960-1961 DODGE DART

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: PIONEER
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1971 DODGE CHALLENGER

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: R/T
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1978 PLYMOUTH PB300 VAN

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: VOYAGER MX WAGON
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1968-1969 DODGE W100 PICKUP

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1976-1978 PLYMOUTH PB300 VAN

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: VOYAGER
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1970 DODGE MONACO

    • CC: 7212
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1970 DODGE MONACO

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1968-1971 CHRYSLER TOWN & COUNTRY

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • EngineType: ALL
    • SubModel: ALL

    1969 PLYMOUTH GTX

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1964 PLYMOUTH SAVOY

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1966-1967 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: 440
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1968-1971 CHRYSLER NEWPORT

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: CUSTOM
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1970 DODGE CORONET

    • CC: 6981
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: SUPER BEE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1970 DODGE POLARA

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: CUSTOM
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1973-1974 CHRYSLER NEWPORT

    • CC: 7212
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1965-1967 DODGE CORONET

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1970-1971 PLYMOUTH FURY

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: SUBURBAN
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1970-1971 DODGE CHARGER

    • CC: 6981
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: R/T
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1965-1967 PLYMOUTH FURY

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: SPORT
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1960 DODGE MATADOR

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1974-1978 DODGE W200 PICKUP

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1978 PLYMOUTH PB200 VAN

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: VOYAGER MX WAGON
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1968 DODGE POLARA

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: 500
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1969 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: DELUXE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1967-1968 DODGE MONACO

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1966-1967 CHRYSLER 300

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • EngineType: ALL
    • SubModel: ALL

    1969 DODGE CHARGER

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: SE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1976-1978 PLYMOUTH PB200 VAN

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: VOYAGER
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1975-1977 CHRYSLER TOWN & COUNTRY

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1969 PLYMOUTH FURY I

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1960-1965 PLYMOUTH FURY

    • CC: 5917
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1969 DODGE CHARGER

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: 500
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1970 DODGE CORONET

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: SUPER BEE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1968 PLYMOUTH FURY

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: SUBURBAN
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1960-1961 PLYMOUTH SPORT WAGON

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1965-1967 PLYMOUTH BELVEDERE II

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1975-1976 DODGE D200 PICKUP

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: CUSTOM
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1960-1963 PLYMOUTH SAVOY

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1965-1967 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: 500
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1977-1978 DODGE MONACO

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BROUGHAM
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1969 DODGE POLARA

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: 500
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1977-1978 DODGE D300 PICKUP

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1970 DODGE POLARA

    • CC: 7212
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • Aspiration: N
    • SubModel: SPECIAL
    • Engine Vin: T
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1975 PLYMOUTH FURY

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1963 DODGE 880

    • CC: 6769
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.7
    • SubModel: BASE
    • CUI: 413
    • EngineType: V8 ( 6.7 L / 413 )

    1972 PLYMOUTH ROAD RUNNER

    • CC: 7212
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1959-1961 CHRYSLER 300

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.8
    • SubModel: BASE
    • CUI: 413
    • EngineType: V8 ( 6.8 L / 413 )

    1965-1967 PLYMOUTH FURY III

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1968 DODGE CHARGER

    • CC: 6981
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: R/T
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1968 PLYMOUTH ROAD RUNNER

    • CC: 6981
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1967 DODGE CORONET

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1965 PLYMOUTH FURY II

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1973-1974 DODGE D200 PICKUP

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1970 DODGE CORONET

    • CC: 7212
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: R/T
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1963-1964 DODGE 330

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1967 PLYMOUTH BELVEDERE

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1963-1967 DODGE D100 PICKUP

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1975-1977 DODGE ROYAL MONACO

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1975-1977 PLYMOUTH GRAN FURY

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: SPORT
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1963-1966 PLYMOUTH BELVEDERE

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1971 DODGE POLARA

    • CC: 7212
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • Aspiration: N
    • SubModel: BROUGHAM
    • Engine Vin: T
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1975-1976 CHRYSLER NEWPORT

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: CUSTOM
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1971 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1959-1961 CHRYSLER WINDSOR

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • EngineType: ALL
    • SubModel: ALL

    1968 PLYMOUTH FURY

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • Aspiration: N
    • SubModel: VIP
    • Engine Vin: L
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1965 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.8
    • SubModel: 440
    • CUI: 413
    • EngineType: V8 ( 6.8 L / 413 )

    1968 PLYMOUTH FURY

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • Aspiration: N
    • SubModel: SPORT SUBURBAN
    • Engine Vin: K
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1969 DODGE CORONET

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: 440
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1970-1971 PLYMOUTH GTX

    • CC: 6981
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1971 DODGE POLARA

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1965 DODGE POLARA

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.8
    • SubModel: BASE
    • CUI: 413
    • EngineType: V8 ( 6.8 L / 413 )

    1975-1978 CHRYSLER NEWPORT

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1960-1963 PLYMOUTH FLEET SPECIAL

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1970-1971 PLYMOUTH BARRACUDA

    • CC: 6286
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 6.3
    • SubModel: BASE
    • CUI: 383
    • EngineType: V8 ( 6.3 L / 383 )

    1963-1964 PLYMOUTH SAVOY

    • CC: 6981
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.0
    • SubModel: BASE
    • CUI: 426
    • EngineType: V8 ( 7.0 L / 426 )

    1963 DODGE 880

    • CC: 5917
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )

    1968 DODGE POLARA

    • CC: 7211
    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 7.2
    • SubModel: 500
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1960-1961 PLYMOUTH CUSTOM

    • Fitment_Note: GM Trans Requires Repl. Of Input Shaft w/Chrysler Shaft Of Correct Length
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 361
    • EngineType: V8 ( 5.9 L / 361 )
    Items You Need
    NOTES
    1.
    Not compatible with 1965-Earlier Bendix-type starters
    2. Due to very close tolerances, bellhousings must be dialed-in to ensure proper flywheel clearance.
    3. On 1981-Later Mustang, we suggest upgrading the linkage to Hays #490-76-228 (heavy-duty clutch cable & billet aluminum clutch quadrant).