FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Lakewood 15980 - Lakewood Bellhousing Locator Kit

Lakewood 15980 - Lakewood Bellhousing Locator Kit

Lakewood#620-15980

Bellhousing Locator
  • Ford and Chrysler
  • Diameter: 0.500"

    Lakewood 15980 - Lakewood Bellhousing Locator Kit Details

    Bellhousing Locators

    Requirements: The bellhousing dowel pin holes must be enlarged approximately 1/16''. Then the bellhousing can be bolted in position loosely. At this point the transmission register bore is checked with a dial indicator and moved in the proper direction by tapping the bellhousing with a mallet. After the bellhousing is positioned, the chamfered washers are placed over the dowel pins and welded to the bellhousing.

    Lakewood 15980 - Lakewood Bellhousing Locator Kit

    Lakewood Bellhousing Locators are used to dial-in a misaligned register bore that could cause a missed shift or premature pilot bearing failure. Two centerless ground dowel pins replace the stock pins and are extra long for use with block plates.

    Note: Welding Required

    JEGS Performance Products 28005 - JEGS Anti-Seize & Lubricant
    Only $8.99

    Earl's D026 - Earl's Nickel-Graphite Anti-Seize
    Only $15.99

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $8.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69


    See All Items You Need