FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

MSD Ignition 62113 - MSD Distributorless Ignition

MSD Ignition 62113 - MSD Distributorless Ignition

MSD Ignition#121-62113

MSD DIS-2 HO Distributorless Ignition
(High Output Race Only)
  • 2-Channel Ignition
  • Two Step Rev Control
  • Step Retard
  • LED Monitor
  • Rotary Switch Adjusted Features

    MSD Ignition 62113 - MSD Distributorless Ignition Details

    Ignitions

    The DIS Ignitions all deliver a stout, CD spark that is capable of burning the majority of air/fuel mixtures. There are of course exceptions, such as full bred race engines running high boost pressures from turbos, blowers or nitrous. To answer these needs, we offer a Higher Output version of the DIS Ignition Controls.The DIS Plus HO Ignitions produce an incredible 170 millijoules of spark energy with 470 primary volts. This increased output will light up fuel mix­tures even under extreme cylinder pressures.The DIS-HO boxes are not CARB approved and are designed for drag racing applications only.

  • For use on 4-cylinder engines with two coil packs

    Operating Specifications
  • Spark Energy: 170 mJ per spark
  • Primary Voltage: 470 volts
  • Secondary Voltage: 43,000 volts (Stock Coil)
  • Spark Series Duration: 20° crankshaft rotation
  • RPM Range: 14,000 RPM with 14.4 volts
  • Voltage Required: 10-18 volt (Negative Ground)
  • Current Draw: 5.3 amp per 10,000 RPM
  • Size: 9.5" L x 4.5" W x 2.2" H
  • Weight: 3 lbs

  • MSD Ignition 62113 - MSD Distributorless Ignition

    The 4-Channel MSD Distributorless Ignition delivers a stout, CD spark that is capable of burning the majority of air/fuel mixtures. The MSD Distributorless Ignition Plus HO Ignitions produce an incredible 170 millijoules of spark energy with 470 primary volts. This increased output will light up fuel mixtures even under extreme cylinder pressures. The Distributorless Ignition-HO boxes are not CARB approved and are designed for drag racing applications only.


    Soft Touch REV Control
    The 4-Channel Distributorless Ignition features an adjustable built-in Soft Touch Rev Control to protect the engine from overrev damage caused by missed shifts or broken driveline components. This feature produces a smooth rev-limiting action by randomly dropping one cylinder at a time and then refiring that cylinder on the next firing cycle. This feature is easily adjusted with simple program switches mounted on the side of the unit.
    Two Step Module Selector
    The Two Step function of the MSD Digital Distributorless Ignition allows you to activate a low RPM limit while staging and waiting for the light to turn green. This popular feature gives you a distinct advantage over your competition by permitting you to control your engine's RPM precisely before every launch. With a fixed RPM limit at the starting line, each launch will be consistent and quick! The RPM limit is easy to adjust in 250 RPM increments with switches built into the side of the housing.
    Programmable Timing Control
    Precise timing control is essential to producing maximum engine power. With the addition of nitrous, turbos or supercharger systems, timing becomes even more critical. To get the most out of your engine, the ignition must be able to compensate for these extreme changes in cylinder pressure throughout the engine's entire RPM range. During low speed operation, the MSD Distributorless Ignition uses the factory ignition to control basic timing functions. Once maximum timing is achieved, 4-Channel Distributorless Ignition can be programmed to retard the timing at a specific rate and RPM point to prevent engine damage due to detonation caused by excessive timing.
    Monitor
    A built-in LED monitor is a useful tool to determine the status of the charging and ignition systems. When the battery voltage drops below 8 volts, the LED will begin flashing at a rate of two times per second, letting you know that the charging system is not operating properly or that the battery has failed. Also, if any of the ignition's channels lose their trigger input, the LED will flash at a rate of one flash per second.
    Ignition Interrupt
    To prevent accidental or unauthorized starting of the vehicle, the 4-Channel Distributorless Ignition systems feature a driver activated ignition interrupt feature that can be used as an anti-theft device. When activated, this feature will prevent the engine from starting by disabling the ignition's voltage output to the coil.
    EMI Noise Protection
    As with all MSD Ignition products, additional protection from Electro Magnetic Interference (EMI) has been added to the design of the Distributorless Ignition System. Special circuitry filters out unwanted noise that commonly causes other aftermarket ignition systems to false trigger, operate intermittently and even fail.

    Note: Not legal for sale or use on pollution controlled vehicles.

    MSD Ignition 121-62113

    RPM
    14,000
    MSD Ignition 8870 - MSD GM DIS Ignition Controls
    Only $44.99

    MSD Ignition 8912 - MSD Dual Ignition Adapter
    Only $79.99

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $8.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69


    See All Items You Need