FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

MSD Ignition 8984 - MSD Starter Saver w/Signal Stabilizer

MSD Ignition 8984 - MSD Starter Saver w/Signal Stabilizer

MSD Ignition#121-8984

Starter Saver
  • With Signal Stabilizer
    MSD® Rebate
    Expires on September 30, 2014
    Rebate 1

    Buy any MSD product and get up to $50 in rebates! More Info

    View All MSD Products

    Expires on 08/31/14

    Rebate 2

    Buy a MSD 8.5mm Super Condutor Wire set and a 4, 6, or 8 MSD Spark Plugs and receive up to $15 in rebates! More Info

  • 8.5mm Super Conductor Spark Plug Wires
  • Spark Plugs

  • MSD Ignition 8984 - MSD Starter Saver w/Signal Stabilizer Details

    When you install a crank trigger system, having locked out timing may put a strain on the starter and flywheel. This compact controller provides a retard that automatically retards the timing during cranking to ease the pressure. The MSD Starter Saver measures only 1.5" X 3.5" X 2" and wires into your ignition system with only four wires. It can be programmed to retard the tim­ing 10° or 20° during cranking only. The retard is activated when the engine begins cranking and is deactivated once the engine reaches over 800 rpm. (If the engine rpm drops below 500 rpm it will activate again.)The Starter Saver receives the trigger signal through an MSD Crank Trigger Pick-Up or the Distributor's magnetic pick-up. This Control has a very accurate pick-up compensation circuit resulting in rock steady timing throughout the entire rpm range of your engine. There is also an LED that illuminates with each trigger signal to confirm operation and the circuitry is completely potted in a polyurethane compound for extreme vibration resistance.

  • Plugs into an MSD Distributor or Crank Trigger pickup
  • Built-in LED monitors trigger input signals
  • Built-in signal stabilizer produces steady timing at all rpm
  • Unit is completely potted with Ciba polyurethane compound
  • Must be used with an MSD Ignition Control, magnetic pickup trigger
    Note:For V-8 applications only

  • MSD Ignition 8984 - MSD Starter Saver w/Signal Stabilizer

    If you have a high performance race engine with locked out timing, cranking the engine can really put a strain on the starter and flywheel. This compact controller provides a retard that automatically retards the timing during cranking to ease the pressure. The Starter Saver wires into your ignition system and can be programmed to retard the timing 10° or 20° during cranking and is deactivated once the engine reaches over 800 rpm (If the rpm's drop below 500 it will activate again). The Starter Saver receives the trigger signal through an MSD Crank Trigger pickup or the distributor's magnetic pickup. This control has a very accurate pickup compensation circuit resulting in rock steady timming throughout the entire rpm range of your engine. There is also an LED that illuminates with each trigger signal to confirm operation and the circuitry is completely potted in a polyurethane compound for extreme vibration resistance.

    Note: Can only be used on V8 applications using an MSD Distributor or Crank Trigger.

    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69