Meziere WP118 - Meziere 100 Series Electric Water Pumps

Meziere #680-WP118

Electric Water Pump

GM LT1

Black Anodize Finish

View In Catalog
Accessories
Similar Items

Share |

Complete list of Meziere 100 Series Electric Water Pumps

Details
Overview
Accessories
Similar Items

Meziere WP118 - Meziere 100 Series Electric Water Pumps Details

Note: F-bodies may require trimming of the fan shroud. Installation of this part requires advanced mechanical skills. See Installation Sheet.

Fits GM LT-1 / LT-4 engines as an insert into the factory pump housing

Suitable for street or drag strip use - 2500+ hour life expectancy

Show quality black finish

Standard motor provides 35 gallons per minute free flow rating

All stainless steel hardware included

Light weight. Complete unit weighs only 3.5 pounds!

Stainless steel large diameter main shaft with high performance ceramic seal

Technical Specifications:

Finishing The System: This pump is supplied complete with gaskets and hardware. Factory hardware is reused. There are no other necessary items.

Amperage draw: Under normal use the pump will draw 6-7 amps.

Overall Height Dimension: The standard pump is 3.00" long from the mounting surface to the tip of the pump.

Pump Weight: This application weighs 3.5 lbs.

16 volt systems: When purchasing a pump for a 16 volt system we recommend the 16 volt optional motor on our pump. The 12 volt pump will work for limited use applications.

Additional Notes:

The standard 35 GPM pump is suitable for normally aspirated engines up to 650HP. Supercharged, turbocharged and high compression, high horsepower applications should use the 55GPM High Flow pump only.

Built to Keep Cars Cool

The 100 Series electric water pumps are very lightweight and flow 35 to 40 gallons per minute. They are ideal for mild street and Sportsman drag cars. The pump housing, motor cap, and impeller are CNC-machined from 6061-T6 billet aluminum for superior corrosion resistance. The stainless steel impeller shaft runs through a 1-piece carbon-ceramic seal that isolates the epoxy-coated motor from coolant for years of reliable service. The motor has a radio frequency suppression circuit in the motor brush card to reduce ignition "RF" interference. Machined with a 1.44" inlet. Available polished or anodized.

JEGS EZ Complete Kits are designed by JEGS professionals so you get all the parts you need.