Ford
Keep those air intake temps down! With Mishimoto’s Performance Intercooler for the 2015-up Ford F-150 EcoBoost, your engine will reach a better level of cooling from the help of both an increase in core volume by 77% over stock and external fin surface area by 163%. They put their core through some grueling tests to see how the new design can alleviate the effects of heat soak. With temperature drops averaging 10-degrees under the stock numbers, your F-150 will take in cooler air, providing better performance and increased tuning potential.
This intercooler design also focuses on strength. With cast end tanks and bar-and-plate construction, this core has a much greater resistance to the outside elements. Whether you need an upgraded core for the work truck or an intercooler that can efficiently handle high boost, Mishimoto has you covered. This intercooler will also come with the coveted Mishimoto Lifetime Warranty.
Features:
- Direct fit for the 2015-Up Ford F-150 EcoBoost
- 10°F (5.5°C) reduction in AIT
- 77% increase in internal core volume
- 163% increase in external fin surface area
- All-aluminum, TIG-welded construction
- Internal fin design for maximum heat transfer with minimal pressure drop
- Fits with stock, upcoming Mishimoto, and most aftermarket intercooler pipe kits
- Mishimoto Lifetime Warranty
Tech Specs:
- Engine Codes: 2.7L EcoBoost / 3.5L EcoBoost
- Coating: Powder Coated
- Tank Wall Thickness: 0.157"
- Max Rec. PSI: 50 psi
- Outlet: 3.0" Diameter
- Inlet: 2.5" Diameter
- Core Size: 20" x 5" x 9.5"
- Overall Width: 7"
- Overall Height: 9.5"
- Overall Length: 29"
- Construction: Bar-and-Plate
Emissions Note:
This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number D-759-6.
CLICK THIS LINK FOR IMPORTANT CARB & EPA EMISSIONS INFORMATION ABOUT THIS PART
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.