OER 153627 Front Tubular Upper Control Arms 1958-64 Impala, Bel Air, Biscayne; Pair
691-153627
OER 153627 Features:
Reproduction of the original upper tubular upper control arms designed for use with 1958-64 Impala, Bel Air, Biscayne, and Full Size Chevrolet models. These tubular style upper control arms change the way the car drives and performs. The wander and vague road feel is dramatically improved, even though it's through the stock steering components.
This suspension system was designed front-to-rear, addressing the problems associated with this older platform. The concept was not to make a race car and destroy the ride, but to bring the car up to modern day standards.
With this in mind the following improvements are achieved with the upper arm only.
- Straight-line stability for high speed freeway cruising
- Improved tire wear and greater tire contact patch on the ground during cornering making the car safer in all driving conditions
The control arms are powder coated black and are pre-assembled with Del-a-lum bushings, billet cross shafts, stock upper ball joints and urethane bump stops. New alignment is recommended after installation. Sold in pairs.
Chevrolet Applications- 1958- 1964 Chevrolet Bel Air
- 1958- 1964 Chevrolet Biscayne
- 1958- 1961 Chevrolet Brookwood
- 1958- 1958 Chevrolet Del Ray
- 1958- 1964 Chevrolet Impala
- 1959- 1961 Chevrolet Kingswood
- 1958- 1961 Chevrolet Nomad
- 1959- 1961 Chevrolet Parkwood
- 1958- 1958 Chevrolet Yeoman
- 1959- 1960 Chevrolet El Camino
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.