FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

PJ1 SP306 - VHT Spray Primer

PJ1 SP306 - VHT Spray Primer


Spray Primer
  • Yellow Zinc
  • ORMD Item - Ground Shipping Only
      $9.99 Ships

    PJ1 SP306 - VHT Spray Primer Details

    Spray Primer

  • Features EZ Touch Fan Spray Nozzle
  • Helps Achieve Top Coat Uniformity
  • For Use On Prepainted And Unpainted Surfaces
  • Excellent Rust And Corrosion Resistance
  • Dry To Touch In 30 Minutes / Handle In 1 Hour
  • Use On All Metal Surfaces
  • Ideal For Automotive Garage Or Home Applications

  • VHT Spray Primers provide an excellent foundation with strong adhesion to intermediate and top coats for any enamel, acrylic, or synthetic lacquer paint. They're formulated to fill scratches/pin holes caused by sanding or body fillers and to create a corrosion barrier on bare metal. VHT Spray Primer air dries quickly; it can be sanded for multi-layer build-ups, the method used most by professional builders and restorers to obtain optimum smoothness on flat or contoured surfaces.

    These multi-purpose primers can be used on metal, fiberglass, masonry, wood, and most plastic. They're ideal for automotive, marine, aviation, home, farm, and industrial applications.

    How to Apply VHT Spray Primer
  • Do not spray paint in windy or dusty conditions.
  • Before starting, test primer with finish coat for compatibility. Do not use VHT Lacquers.
  • Mask off all areas NOT to be painted (paper should extend at least 18" from area to be sprayed).
  • For area to be painted, tape far enough away to allow room to feather the spray (placing masking tape too close will cause ridges).
  • Spot prime exposed metal, scratches, and pin holes with 2-3 very light coats of primer. Primer will dry in 30-45 minutes for sanding.
  • Gently sand with 400 to 600 grit wet/dry sandpaper. Make sure to feather all edges.
  • Rinse thoroughly, and wipe with a tack cloth. If imperfections are still visible, repeat process.
  • Spray primer in long, even strokes--lengthening each stroke to feather edges (thus minimizing the need for heavy sanding later).
  • For best results, apply finish coat 1-2 hours after final sanding.

  • PJ1 322-SP306

    Manufacturer's Part Number:
    Rated 5 out of 5 by from Works good As a certified welder / autobody tech, this stuff works well and takes the heat without flaking off. Good adhesion after proper surface prep also.
    Date published: 2015-10-01
    • 2015-10-09T10:26CST
    • bvseo_cps, prod_bvrr, vn_cps_3.1.6
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_91372, PRD, sort_relevancy
    • clientName_jegs
    Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69