Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Reid Racing PG2000R

Superglide 2-Piece Transmission Case Case with factory installed needle roller bearing in the hub

Reid Racing PG2000R


jegs shipping
FREE Shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Reid Racing PG2000R Superglide 2-Piece Transmission Case Case with factory installed needle roller bearing in the hub $915.99
Superglide 2-Piece Transmission Case
  • Case with factory installed needle roller bearing in the hub
  • 11" overall length

  • Reid Racing PG2000R Details

    Superglide 2-Piece Transmission Cases


    Case Material
    Adjustable Trans-Brake Release
    Flexplate Shield Built In
    Sold individually
    Transmission Case Finish
    Transmission Shield Built In
    Transmission Shield Rating
    SFI 4.1
    Manufacturer's Part Number:

    Starting with the time proven 1-piece Superglide, Reid Racing engineers decided against the ''cut it in half'' approach and specifically designed this case to be used as a 2-piece unit. The full 360 degree reinforced mounting flange provides the needed rigidity and stiffness, while extra thickness in critical areas adds strength to the rear of the case and eliminates the need for an internal liner. Unlike our sand-cast competitors, our permanent mold casting process is used for extremely accurate, tough, porosity-free cases. Adapter bellhousings and flexplates are available for most popular engine combinations.

  • No internal or external shields required; case is SFI 4.1 Certified*
  • Uses all stock and aftermarket internals; no oddball parts.
  • Bellhousings available for Chevrolet, Buick, Olds, Pontiac, Ford, and Mopar engines. Indexing ring on the oversized flange properly centers bellhousing.
  • Front pump can be installed with or without the bellhousing attached.
  • Made by a permanent mold process from heat treated aircraft grade aluminum. This process is stronger, more ductile, and more accurate than competitors' brittle sand castings.
  • Oil pan flanges are thickened to stiffen case. Beefed up oil pump area prevents front case distortion under high horsepower. Minimizes flexing which causes gear misalignment and breakage. This case does not leak!
  • Oil pump mounting bolt holes heli coiled to prevent thread failures.
  • Patented adjustable transbrake release. Adjustment bolt varies both the quickness and the rate of release which varies the reaction time and the hit of the tires.
  • Predrilled for double dump transbrake.
  • Redesigned oil passages radically improves release time of the transbrake and allows instant application.
  • Patented reverse piston bleed hole vents air from piston area and increases transbrake consistency.
  • No need for external shields or bottom straps.
  • Each case is thoroughly inspected at every step of its production. You can be assured that you will not have the problems associated with porosity and misalignment from poor castings or inferior machining as with other cases.

  • How long is thanks from bell housing to out put

    Asked by: KCNR
    The overall length of this case is 11", then the style of bell housing would be added to that.
    Answered by: Rusty B
    Date published: 2017-12-06
    • y_2018, m_3, d_23, h_20CST
    • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_1
    • loc_en_US, sid_10001_10001_1321823, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You May Also Consider