Items You Need
GM Chevy Corvette
Ridetech's coil-over system for 1963-1967 Corvettes will transform the handling into a new Corvette.
1963-1967 Corvette Package Includes:
- HQ Series Single-Adjustable Coil-Over Shocks
- High Tensile Steel 2-1/2 inch Diameter Coil Springs
- Front Upper & Lower StrongArm Control Arms w/Tall Spindles
- Tru-Turn Complete Steering System
- Front MuscleBar Sway Bar with PosiLinks End Links
- Rear StrongArms
Note: The C2 Corvette TruTurn Suspension package uses a GM Spindle used on 1967-69 Camaro (F-body), 1964-72 Chevelle (A-body), and 1968-74 Nova (X-body). Any Brake Kit designed to fit the OEM Disc Brake Spindle of the listed cars will fit the Spindle in your TruTurn System.
Individual System Overview:
- Front Upper StrongArms feature corrected balljoint angles for taller spindles allowing additional caster, steering feel, and high-speed stability. Offset slugs are available for an additional caster. The use of injection molded Delrin bushings reduces deflection and stiction.
- Front Lower StrongArms feature a double sheer lower mount for added strength, while the lower shock mount has been lowered for an increase in suspension travel. Lower ball joints are moved forward to increase caster while also keeping the wheel centered in the wheel well. The use of injection molded Delrin bushings reduces deflection and stiction.
- TruTurn System includes taller spindles for additional negative camber gain during cornering to maximize tire contact. Also included are billet aluminum steering arms, center link adapter, tie rods, and adjusters designed to eliminate bumper steer and correct Ackerman angles to allow for wider tires.
- HQ Series Coil-Overs feature a monotube design with an impact forged aluminum body providing excellent ride quality and handling. Ride and handling can be fine-tuned with the rebound adjustment knob located at the top of the shock.
- Front MuscleBar is of a splined design to help reduce body roll and creates additional clearance for wider tires. The use of Ridetech exclusive PosiLink end links provides immediate engagement from the StrongArms to the chassis.
- Rear StrongArms use a truss design for maximum strength and lightweight and use an offset for additional tire clearance The upper cross member easily bolts in place of the stock cross member. R-joints are used at the front mounting points for reducing stiction and roll bind. An adjustable coil-over mount is located behind the axle for easy adjustments.
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.