Call Our Support Line
24 Hours / 7 Days a Week!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Scorpion Racing Products SCP1024-1

Race Series Rocker Arm Small Block Ford V8 351C-351M-400

Scorpion Racing Products SCP1024-1


jegs shipping
Estimated ship date 02/02/18 if Ordered Today
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Scorpion Racing Products SCP1024-1 Race Series Rocker Arm Small Block Ford V8 351C-351M-400 $23.99
Race Series Rocker Arm
  • Small Block Ford V8 351C-351M-400
  • 1.73 Ratio
  • 5/16" Pedestal Mount Stud
  • Each

  • Scorpion Racing Products SCP1024-1 Details

    Small Block Ford V8 351C-351M-400 / 5/16" Pedestal Mount Stud



    Part Numbers SCP1021, 1022, 1024, 1069, 1089, 1096, 1097,

    3021, 3022, 3024

    Please read instructions carefully and completely before beginning.

    The most important thing to know is always do one cylinder at a time and turn engine in the normal direction of rotation while installing. Follow directions closely and installation is easy. If you have any problems please call our Tech Support Line. We will be glad to walk you through your installation.

    Scorpion Tech Support: 352-512-0800

    Removal of the OEM Rocker Arms:

    This should be done one cylinder at a time with extreme caution. You must make sure each valve is completely closed before removing the rocker bolt. Failure to do so will result in stripping out the threads. After removing the old rocker arms, closely examine the ends of your old pushrods for wear. Also check the pushrods for straightness. Scorpion recommends using new pushrods with new rocker arms to ensure proper mating of the pushrod end to rocker arm cup.

    Installation instructions for Scorpion Non-Adjustable Rocker Arms:

    Working on one cylinder at a time, watch the intake pushrod while rotating the engine in the normal direction of rotation. When the pushrod moves up and then all the way down (intake valve just closes) install the exhaust rocker. Make sure the radius on the pedestal mates with the radius on the rocker fulcrum - the flat on the fulcrum goes up against the head of the attaching screw. Lube with Scorpion Cam & Lifter Installation Lubricant (part numbers SRPAL4-1 or SRPAL8-1) and lightly snug the rocker arm attaching screw with your fingers until the up and down looseness of the rocker is taken up (zero lash). Setting your torque wrench to 18 to 20 ft. lbs., turn the screw until the torque is reached. The screw should turn one half to one full turn between zero lash and torqued. This will give the proper lifter preload. If there is less than one half turn, a longer pushrod is needed. If there is more than one turn, shimming of the rocker stand or a shorter pushrod is needed. Scorpion Performance offers shims in .020" thickness, part number SCPRS.020 (32 pieces).

    To install the intake rocker arm, rotate engine in normal direction of rotation until the exhaust rocker just starts to move up (exhaust valve just starts to open). Now install the intake rocker arm using the same procedure as used on the exhaust rocker arm above. Continue cylinder by cylinder until your installation is complete.

    Note: Always use a quality assembly lube such as Scorpion Cam & Lifter Installation Lubricant (part numbers SRPAL4-1 or SRPAL8-1) on all moving parts.


    Any component changes to the valve train (camshaft, valve length, etc.) or machining to the engine block or cylinder heads will affect the results of this procedure.



    Manufacturer's Part Number:

    Scorpion Race Series Rocker Arms are lightweight for maximum performance and known for superior quality as well as being the quietest rocker arms on the market. Micropolished finish for maximum durability and blue anodized for additional protection.

  • Available in many ratios
  • Clear 1.625 valve springs
  • Handles up to .950 lift & 950 lbs open spring pressure
  • CNC Machined Aerospace-grade 7000 series Aluminum
  • Centerless Ground Fulcrum
  • Needle Bearing Fulcrum & Roller Tip
  • Lifetime Warranty

    JEGS Easy Kits are designed by JEGS high performance racing professionals to help you get all the performance parts you need for your race car, hot rod or truck.

  • Items You Need

    Before you leave us... Receive a free catalog or join our email list

    Sign up to receive our catalog or subscribe to our email list now to see our exclusive email only specials, new products, and offers!

    Request CatalogJoin Email List