Trail Gear 130303-KIT Power Steering Pump, Trail-Gear Power Flow 1650 PSI Without Pulley For Custom Hydraulic RAM Steering
542-130303-KIT
Trail-Gear 130303-KIT Features:
The Trail-Gear Power Flow 1650 PSI Power Steering Pump has been designed and engineered to provide ultimate performance in hydraulic ram steering applications . It is a direct replacement for "TC" and "CB" style pumps.
The body of the pump is constructed of steel to increase reliability and decrease wear. It is equipped with heavy-duty hardened internals, large bushings and an oversized shaft making it ideal for high HP motors with greater radial loads.
The Power Flow Pump has one of the highest flow rates in the industry and maintains flow consistency across all RPMs. It will not bypass early.
- 1650 PSI Pump Engineered For Ultimate Performance
- All Steel Body
- Heavy-Duty Heat-Treated Internals, Large Bushings, and Oversized Shaft
- Endurance Tested at 400 F
- Steady Flow Across All RPM
- Direct Replacement for "TC" and "CB" Style Pumps
- Each Pump is Bench Tested for Quality Assurance
- Flow Rate = 9.4 mL per revolution (17.4 gallons per minute at 7,000 RPM Max. Speed)
IMPORTANT NOTES:
Warning! The Power Flow™ Power Steering Pump has a maximum rotational speed of 7,000 RPM. Do not drive the pump beyond 7,000 RPM! If you intend to use the pump in a custom build, you will need to calculate the correct pump pulley size to ensure that you never drive the pump beyond 7,000 RPM. Please consult our Power Flow™ Power Steering Pump Pulley Diameter Calculation PDF for the formula and a practical example of how to do this. You may also contact our Technical Support at 1.877.4X4.TOYS or 559-252-4950 or by email at [email protected] for additional assistance with your calculations or with any other aspect of your build.
Use of anything other than a Power Steering Pulley Puller/Installer to install or remove a pulley from your Power Flow™ Power Steering Pump will void the warranty!
Pump operates in the clockwise configuration
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.