FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

VHT SP301 - VHT Spray Primer

VHT SP301 - VHT Spray Primer

VHT#322-SP301

Spray Primer
  • White
  • ORMD Item - Ground Shipping Only

    VHT SP301 - VHT Spray Primer Details

    Spray Primer

  • Features EZ Touch Fan Spray Nozzle
  • Helps Achieve Top Coat Uniformity
  • For Use On Prepainted And Unpainted Surfaces
  • Sands Easily
  • Dry To Touch In 30 Minutes / Handle In 1 Hour
  • Use On Metal/Wood/Fiberglass Surfaces
  • Ideal For Automotive Garage Or Home Applications

  • VHT SP301 - VHT Spray Primer

    VHT Spray Primers provide an excellent foundation with strong adhesion to intermediate and top coats for any enamel, acrylic, or synthetic lacquer paint. They're formulated to fill scratches/pin holes caused by sanding or body fillers and to create a corrosion barrier on bare metal. VHT Spray Primer air dries quickly; it can be sanded for multi-layer build-ups, the method used most by professional builders and restorers to obtain optimum smoothness on flat or contoured surfaces.

    These multi-purpose primers can be used on metal, fiberglass, masonry, wood, and most plastic. They're ideal for automotive, marine, aviation, home, farm, and industrial applications.

    How to Apply VHT Spray Primer
  • Do not spray paint in windy or dusty conditions.
  • Before starting, test primer with finish coat for compatibility. Do not use VHT Lacquers.
  • Mask off all areas NOT to be painted (paper should extend at least 18" from area to be sprayed).
  • For area to be painted, tape far enough away to allow room to feather the spray (placing masking tape too close will cause ridges).
  • Spot prime exposed metal, scratches, and pin holes with 2-3 very light coats of primer. Primer will dry in 30-45 minutes for sanding.
  • Gently sand with 400 to 600 grit wet/dry sandpaper. Make sure to feather all edges.
  • Rinse thoroughly, and wipe with a tack cloth. If imperfections are still visible, repeat process.
  • Spray primer in long, even strokes--lengthening each stroke to feather edges (thus minimizing the need for heavy sanding later).
  • For best results, apply finish coat 1-2 hours after final sanding.

  • Grime Boss A541S30X - Grime Boss Hand Wipes
    Only $9.99

    Grime Boss A544R10X - Grime Boss Hand Wipes
    Only $4.69