- Engines & Components
- Cylinder Heads
- AFR Small Block Chevy 180cc LT1 Eliminator Street Aluminum Cylinder Heads
The Small Port, High Velocity, Torque Monster!
The AFR Emissions Legal (CARB EO #D-250-2 for engines up to 1994), 180cc intake port LT1 Small Block Chevy cylinder heads are available in the LT1 angle plug version only. These heads have several combustion chamber options with a 64cc exhaust port and a 3/4" thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm diameter stem, 2.020'' intake and 1.600'' exhaust with AFR's hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of idle to 6000 rpm (higher rpm ranges possible depending on combination of parts), 23° valve angle, and standard valve spacing make this the perfect street cylinder head for 350-383ci performance engines and is specifically designed for 1992-95 Corvettes and 1993-97 Camaros. No special parts are required (see footnotes here). Dual valve cover bolt pattern is standard. Exhaust port and bolt pattern are raised 3/32" over GM L98 cylinder heads, this rarely affects header or chassis fitment. .
Show More
Installation Note: Hydraulic roller cams typically experience valve float at 6200-6400 rpm because of their fast ramp rates. AFR suggest you upgrade your springs to AFR part number 033-8605, 1.270'' O.D. with higher spring pressures and use our Patented ''Hydra Rev Kit'' to reduce chances of valve float associated with rpm 6200 or higher.
180cc LT1 Eliminator Street Cylinder Head Features:
- 100% CNC Ported Combustion Chambers
- 100% CNC Ported Exhaust Ports
- 100% CNC Ported Intake Ports
- Competition 5-angle Valve Job
- 180cc Intake Ports
- 64cc Exhaust Ports
- Bead Lock Intake Valve, 2.020'' x 4.903'' Overall Valve Length
- Bead Lock Exhaust Valve, 1.600'' x 4.955'' Overall Valve Length
- PAC Racing Valve Spring: 1.290'' OD Hydraulic Roller Dual Valve Spring, 135 lbs on seat, .600'' maximum lift
- 7° Titanium Retainers
- 7° Bead Lock Valve Keepers
- 3/8'' Rocker Studs (if using non-self aligning rockers)
- Adjustable 5/16'' Guide Plates
- Viton Valve Seals
- Hardened Spring Cup
- Intake Valve Seats
- Exhaust Valve Seats
- Bronze Valve Guides
- Standard Exhaust Bolt Pattern, Accepts Factory and Aftermarket Headers