- Steering & Suspension
- Shocks, Struts & Mounting Components
- Allstar Shock Shims
Finely Tune Your Shocks Quickly And Accurately
Shock shims are placed directly onto the shock shaft to simplify fine tuning and setup of the suspension without disassembling or removing the shock. Shims are available in a variety of designs and colors. U-Shaped Shims are designed for quick removal and installation into tight stacks (where twisting the shim into the stack is not possible or the car is on the ground). Semi-Solid Shims are designed for quick installation and removal, will not fall out, requires 3/4" of space to install/remove (typically installed on off-ground vehicle). 2-Piece Collar Shims are designed to attach around the shaft of the shock and secure in place with a zip tie. Commonly used during initial set-up or to take up a large amount of travel.
Show More
Features:
- Heavy Duty Composite Material Designed To
- Fine Tune Shock Suspensions Without Disassembling The Shock
- Available For 14mm & 16mm Shock Shaft Sizes
Starter Kits Include - 4 - 1/16" U-Shaped Shims
- 4 - 1/8" U-Shaped Shims
- 2 - 3/8" U-Shaped Shims
- 4 - 1/16" Semi-Solid Shims
- 4 - 1/8" Semi-Solid Shims
Standard Kits Include - 12 - 1/16" U-Shaped Shims
- 12 - 1/8" U-Shaped Shims
- 6 - 3/8" U-Shaped Shims
- 12 - 1/16" Semi-Solid Shims
- 12 - 1/8" Semi-Solid Shims
- 2 - 1/2" 2-Piece Collar Shims
- 2 - 3/4" 2-Piece Collar Shims
- 2 - 1" 2-Piece Collar Shims
- 1 - Shim Storage Case
Deluxe Kits Include - 12 - 1/16" U-Shaped Shims
- 24 - 1/8" U-Shaped Shims
- 10 - 3/8" U-Shaped Shims
- 12 - 1/16" Semi-Solid Shims
- 24 - 1/8" Semi-Solid Shims
- 6 - 1/2" 2-Piece Collar Shims
- 6 - 3/4" 2-Piece Collar Shims
- 6 - 1" 2-Piece Collar Shims
- 1 - Shim Storage Case
Filter Results
AVAILABILITY
PART TYPE
PART TYPE
BRAND
BRAND
RATING
Part Category
Vendor Part Number
Part Fitment
PRICE