FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!
Unpublished Item

Clevite 77 GM High-Performance Bearings


Clevite
Clevite 77 GM High-Performance Bearings

Product images may differ from actual product appearance.

These Tri-Metal 77 engine bearings combine the strength of a copper-lead alloy layer with steel backing and an electroplated babbitt metal. The steel backing provides strength and durability; the babbitt overlay provides the critical surface characteristics of slipperiness and conformability. This ideal design has properties not even found in many original equipment bearings. Clevite offers main bearings, rod bearings and cam bearings in this series.

H Series -
  • Best to start with when unsure which bearing to choose
  • Medium level of eccentricity and high crush
  • Enlarged chamfers for greater crankshaft fillet clearance
  • Made without flash plating for better seating
  • Use with crankshafts that have oversized fillets
  • Use with engines that run mid-high RPM range
  • Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface

    P Series -
  • Typically the greatest level of eccentricity
  • Rods and mains have high crush for maximum retention
  • Most are fully grooved to maximize oil flow to rod bearings
  • Reduced overlay thickness to prevent overlay fatigue
  • Use where extremely high RPMs cause severe rod bore close-in
  • Use where higher eccentricity is desired to narrow bearing contact patterns

    V Series -
  • This series essentially duplicates Clevite's former Vandervell parts
  • Typically low to medium eccentricity
  • Not available with oversized chamfers
  • No flash plating on the steel back
  • All Clevite main bearing sets use a single-piece thrust bearing
  • Narrowed parts available to accommodate increased crankshaft fillet clearance
  • Lead-indium overlay offers slightly better conformability

    M Series -
  • These are special purpose bearings having a nominal .005" thick Babbitt lining on a hardened steel back
  • They are intended mainly for Blown Fuel engines where severe crankshaft deflections cause edge loading of the bearings
  • Under these operating conditions bearing service life will be very short
  • Frequent inspection and replacement is recommended


    Part Number Key
    • H - High-Performance
    • HD - High-Performance bearing with dowel hole
    • HK - High-Performance bearing with moly/graphite coating
    • P - Standard Clevite 77 tri-metal bearing
    • M - Blown Fuel Engine bearing for severe crankshaft deflections & edge loading
    • N - High-Performance Narrowed for greater crankshaft fillet clearance
    • HG - High-Performance full angular grooved bearing
    • V - High-Performance with Lead Indium overlay (On Main Sets this indicates partial groove also)
    • VG - High-Performance with Lead Indium full angular grooved bearing
    • D - Bearing has a dowel hole
    • K - Tri-Armor coated bearing
    • X - Bearing has .001 more oil clearance than standard
    • XX - Bearing has .002 more oil clearance than standard
    • A or AL - Indicates Aluminum bearing material

    Note: Clevite main and cam bearings are priced as sets; rod bearings are priced each.


  • 214 Products Page: 1 2 3 4 5 ... |  Next Results per Page:
    Cam Bearing Sets

    695-SH1349S
    Cam Bearing Set
  • 1967-02 305/307/327/350/400 (5.0/5.4/5.7/6.6L) V8 Engines
  • $34.99
    Order Today Ships 09/08/15

    695-SH1350S
    Cam Bearing Set
  • 1980-10 GM 3.8/4.3L V6 Engines
  • $34.99
    Order Today Ships 09/08/15

    695-SH1354S
    Cam Bearing Set
  • 1964-76 GM 350/455 (5.7/7.5L) V8 Engines
  • $39.99
    Order Today Ships 09/08/15

    695-SH1812S
    Cam Bearing Set
  • 1992-09 GM 3.8L V6 Engine
  • $34.99
    Order Today Ships 09/08/15

    695-SH1814S
    Cam Bearing Set
  • 1999-10 GM 294/323/325/350/364 (4.8/5.3/5.7/6.0L) V8 Engines
  • $34.99
    Order Today Ships 09/08/15

    695-SH2125S
    Cam Bearing Set
  • 1999-12 GM 294/323/325/364/376/427 (4.8/5.3/6.0/6.2/7.0L) V8 Engines
  • $36.99
    Order Today Ships 09/08/15

    695-SH287S
    Cam Bearing Set
  • 1955-69 GM 265/283/316/325/327/330/331 (4.3/4.6/5.2/5.3/5.4L) V8 Engines
  • $50.99
    Order Today Ships 09/08/15

    695-SH290S
    Cam Bearing Set
  • 1966-02 GM 283/302/305/307/327/350 (4.6/5.0/5.4/5.7L) V8 Engines
  • $33.99
    Order Today Ships 09/08/15

    695-SH292S
    Cam Bearing Set
  • 1964-81 GM 265/326/350/400/455 (4.3/5.3/5.7/6.6/7.5L) V8 Engines
  • $37.99
    Order Today Ships 09/08/15

    695-SH399S
    Camshaft Bearing Set
  • 1962-74 GM 3.5/3.8/4.1/4.8L 6 Cylinder Engines
  • $40.99
    Order Today Ships 09/08/15

    695-SH615S
    Cam Bearing Set
  • 1966 Chevy 427 (7.0L) V8 Engine
  • $47.99
    Order Today Ships 09/08/15

    695-SH616S
    Cam Bearing Set
  • 1967-07 Chevy 427/454/496/502 (7.0/7.4/8.1/8.2L) V8 Engines
  • $34.99
    Order Today Ships 09/08/15

    695-SH617S
    Cam Bearing Set
  • GM 496 (8.1L) V8 Engine
  • $61.99
    Order Today Ships 09/08/15
    Connecting Rod Bearings

    695-CB1228P
    Connecting Rod Bearing
  • 1977-94 GM 3.0/3.2/3.3/3.8/4.1L V6 Engines
  • P Series
  • $12.99
    Order Today Ships 09/08/15

    695-CB1228P10
    Connecting Rod Bearing
  • 1977-94 GM 3.0/3.2/3.3/3.8/4.1L V6 Engines
  • .010
  • P Series
  • $12.99
    Order Today Ships 09/08/15

    695-CB1227H
    Connecting Rod Bearing
  • 1978-84 GM 3.3/3.8L V6 Engines
  • H Series
  • $20.99
    Order Today Ships 09/08/15

    695-CB1227HX
    Connecting Rod Bearing
  • 1978-84 GM 3.3/3.8L V6 Engines
  • H Series
  • $26.99
    Order Today Ships 09/08/15

    695-CB1227P
    Connecting Rod Bearings
  • 1978-84 GM 3.3/3.8L V6 Engines
  • P Series
  • $12.99
    Order Today Ships 09/08/15

    695-CB1227P10
    Connecting Rod Bearing
  • 1978-84 GM 3.3/3.8L V6 Engines
  • P Series
  • -.010"
  • $16.99
    Order Today Ships 09/08/15

    695-CB1238P
    Connecting Rod Bearing
  • 1980-09 GM 2.8/3.1/3.4L V6 Engines
  • P Series
  • $9.99
    Order Today Ships 09/08/15

    695-CB1238P25MM
    Connecting Rod Bearings
  • 1980-09 GM 2.8/3.1/3.4L V6 Engines
  • P Series
  • -.25mm
  • $9.99
    Order Today Ships 09/08/15

    695-CB1358A20
    Connecting Rod Bearing
  • 1985-10 GM 4.3L V6 Engine
  • -.020"
  • $12.99
    Order Today Ships 09/08/15

    695-CB1358P
    Connecting Rod Bearing
  • 1985-10 GM 4.3L V6 Engine
  • P Series
  • $16.99
    Order Today Ships 09/15/15

    695-CB1358P1
    Connecting Rod Bearing
  • 1985-10 GM 4.3L V6 Engine
  • P Series
  • -.001"
  • $16.99
    Order Today Ships 09/08/15

    695-CB1358P10
    Connecting Rod Bearing
  • 1985-10 GM 4.3L V6 Engine
  • P Series
  • -.010"
  • $16.99
    Order Today Ships 09/15/15

    695-CB1398V10
    Connecting Rod Bearing
  • 1978-89 GM 3.0/3.2/3.8/4.1L V6 Engines
  • V Series
  • -.010"
  • $15.99
    Order Today Ships 09/15/15

    695-CB1648P
    Connecting Rod Bearing
  • 1993-10 GM 267/281 (4.4/4.6L) V8 Engines
  • P Series
  • $35.99
    Order Today Ships 09/08/15

    695-CB1663H
    Connecting Rod Bearing
  • Custom Application
  • Bore: 2.015"
  • $18.99
    Order Today Ships 09/08/15

    695-CB1665HXNDK
    Connecting Rod Bearing
  • Chevrolet V8 - Special Racing Application
  • $34.99
    Order Today Ships 09/08/15

    695-CB1776A
    Connecting Rod Bearing
  • 1966-10 GM 307/325/327/350/376 (5.0/5.3/5.7/6.2L) V8 Engines
  • Aluminum
  • $4.69
    Order Today Ships 09/08/15

    214 Products Page: 1 2 3 4 5 ... |  Next Results per Page: