Mopar Performance Ram Pre-Runner Kit
The Mopar Ram Runner Kit is equal to or better than its competitors on a number of fronts. The heavy-duty suspension system can handle practically any abuse the off-road dishes out. Front upper and lower control arms, which are three inches longer than production arms, provide added width and allow greater wheel travel over rough dirt trails.
Front lower control arms are constructed of 4130 chrome moly steel in order to withstand off-road punishment. Upper control arms include rebuildable high-angle ball joints. Both inner and outer tie rods are substantially strengthened and contribute to the rugged, off-road steering characteristics and capabilities. Outer tie rods, constructed of forged steel, measure 1-inch in diameter. Inner tie rods also are nearly 20 percent beefier, increasing from 0.62 inches to .75 inches.
At the rear, a 5-link coil spring rear suspension is utilized and helps provide a 30-degree departure angle.
The Pre-Runner Stage II kit offers a boost in suspension travel, 14 inches both front and rear, which is superior to the suspension travel on the Ford Raptor. The Ram Runner kit, which includes Fox 3-inch internal bypass shocks, offers performance on par with that of an off-road Baja race truck and outperforms the 2.5-inch shocks of the competition.
Ground clearance is approximately 13 inches at the center of the front cross-member and 16 inches at the rocker panels w/ appropriate off-road wheels & tires (not included). Off-Road wheels & tires are required for suspension clearance (available separately).
Body parts included in the Mopar Ram Runner Kit, created with Trophy Truck inspiration, feature a tough-yet-stylish look built to handle the rigors of the off-road while turning heads on the street. The front bumper is constructed of steel with an integrated aluminum skid plate. With a 41-degree approach angle, ample clearance is assured over the deepest off-road obstacles.
Front and rear fiberglass fenders are lightweight, tough and durable with wider wheel wells that allow for tremendous suspension articulation with zero tire-to-body interference. The three-inch wider track also provides an imposing, aggressive look.
The stamped aluminum, dual-scooped sport performance hood adds even more to the forceful appearance of the Ram Runner kit. The spare-tire carrier is located in the bed of the pickup and enables easier access and provides the ability to transport a larger spare tire, contributing to the overall appearance and "Baja truck feel".
Note: This street-legal kit requires welding and permanent modification of your vehicle.
Fits: 2009 to 2012 model-year Ram 1500 4x4 Trucks
Each part Must be purchased separately
Mopar Performance Off-Road Rear Tire Carrier Rear Placement Allows Easier Access and Ability to Carry Larger Tires
Off-Road Rear Tire Carrier
Mopar Performance Sport Performance Hood Stamped Aluminum
Sport Performance Hood