NOS Fogger Nozzles

Product images may differ from actual product appearance.

Fogger Nozzles

The original, patented NOS Fogger nozzle revolutionized the way nitrous oxide and fuel were dispersed into an engine. Its unique flow design provide superior atomization of supplemental fuel as well as more even fuel distribution within the nitrous flow. Both original Fogger nozzles is made from brass and has a black finish. It features a stamped NOS logo and tags for fuel and nitrous identification during installation.

Fogger Soft Plume 90° Nozzles

Soft Plume 90° Nozzle (Stainless Steel) - Ideally suited for many Manifold designs including E.F.I., the Soft Plume 90° nozzle effectively disperses the fuel/nitrous mixture in an atomization pattern that is second to none and particularly beneficial to smaller displacement engines. It is very popular in stock applications. The Soft Plume 90° nozzle is made of rugged stainless steel and has a record of outstanding reliability.

Fogger-R Nozzles

Annular Discharge Fogger Nozzle (Stainless Steel) - NOS has done it again. The stainless steel Annular Discharge nozzle is the most effective design in the world, The Annular Discharge Fogger® nozzle's secret lies in specially engineered annular orifices which mix the nitrous and fuel in a radial pattern outside the nozzle tip to provide superior atomization of supplemental fuel as well as more even fuel distribution within the nitrous flow. This new nozzle design produces an even tighter "cone" of nitrous oxide/fuel mixture and provides more precise control of nitrous/fuel ratios throughout the jetting spectrum. It is important to note that the Annular Discharge nozzle shoots out straight, and as such is NOT a direct replacement for the standard Fogger™ or Fogger® 2 nozzles. It is designed to be fitted to the Manifold at a very tight angle (much closer to 30° than the normal 90° - but entirely dependent on runner design). Because of the way the Annular Discharge nozzle can be installed, it does not protrude into the intake tract and disrupt flow. The Nozzles are made of stainless steel for superior durability.

Fogger-2 Nozzles

Fogger2™ Nozzle, Standard - The original, patented NOS Fogger™ nozzle revolutionized the way nitrous oxide and fuel were dispersed into an engine. And to this day, there's nothing better than it for a variety of applications. However, as engine displacements got bigger, cylinder head designs got better and Camshafts technology advanced, it became evident that greater precision was needed and NOS developed the Fogger2™ nozzle. Its unique flow design provide superior atomization of supplemental fuel as well as more even fuel distribution within the nitrous flow than other nozzles. Changing power levels takes only seconds and is simply a matter of changing the fuel and nitrous Jets on the nozzle. Both the original Fogger and Fogger2™ Nozzles are made from brass and have a black finish. They feature an etched NOS logo and tags for fuel and N20 identification during installation or jet changes.

Fan Spray Nozzle

The NOS line of Fan Spray nozzles are designed to be used as independent nozzles for nitrous and fuel where installation restrictions might make the Fogger Nozzle impractical. Fan Spray nozzles are fully adjustable with a simple jet change and feature injection at a 90° angle much like the NOS Fogger 2 Nozzle.

Jet Spray Nozzle

Designed to be used as independent nozzles for Nitrous and fuel where installation restrictions might make the Fogger Nozzle impractical. For example, the hidden under-the-manifold direct port Nitrous system utilizes Jet Spray nozzles due to room restrictions. Jet Spray nozzles have a fixed metering orifice and spray at either straight or 90° angles depending on your needs.