On 3 Performance Turbo Kit 94-95 5.0L SN95 Mustang


On 3 Performance
On 3 Performance Turbo Kit 94-95 5.0L SN95 Mustang

This kit comes with our On3 70mm turbo which have proven itself over time on the shop cars and many of our customers cars. The turbo will support up to 650rwhp on cars that are able to handle the power. Out of the box, we use a ~7psi spring in the gate and supply an assortment of springs to get you up to or around the ~14psi range. With the addition of a manual boost controller, the turbo will support 20psi.

Many of the SN95 5.0L Mustang specific kits do not allow you to retain your ABS or will require you to move it and make new brake lines. We were able to snake the intercooler tubing though along with our turbo placement to avoid any of the relocation. ABS with our turbo system WILL NOT require any relocation and will be kept in place with all stock lines. If your car has A/C or power steering, you will be able to keep them in place as well without having to remove it to clear the kit.

Key turbo kit features:

  • 304 Stainless Steel Intercooler Piping and Downpipe
  • V-band Connections On the Hotside
  • Downpipe o2 Bung Welded for Wideband Use
  • Bar and Plate Intercooler
  • All Hardware For Each Component Supplied In The Kit
  • Neatly Packaged to Make Install As Easy As Possible
  • Complete Instruction Packet W/Photos

    Each Kit includes:

  • Turbo Headers and Crossover Tubing Constructed of Mild Steel With a Black High Temp Coating
  • Turbocharger - On 3 Performance 70mm Compressor Wheel, .70ar Coldside, .68ar Hotside, and T-4 Flanged Journal Bearing
  • 3" 304 Stainless Steel Downpipe, V-band Connections, 16 Gauge
  • 304 Stainless Steel Wastegate Dump Tube
  • 3" Intercooler, Inlet and Outlet - Bar and Plate Core
  • Laser Cut & Black Powder Coated Intercooler Support Bracket Kit
  • 2.5" 304 Stainless Steel Intercooler Piping From Compressor to I/C, 3'' Turbo to Throttle Body
  • Intercooler to throttle body - 2.5" and 3" from Inner Fender To Throttle Body
  • All Silicone Couplers (Black) Needed and Stainless Steel T-bolt Clamps
  • On 3 Performance 38mm Wastegate (Black)
  • On 3 Performance 50mm Blowoff Valve (Black)
  • Blow-off Valve and Wastegate Flanges Installed and Welded
  • 304 Stainless Steel Power Steering Cooler Line
  • On 3 Performance Wastegate Spring Kit
  • Oil Feed Kit With All Fittings - Stainless Braided Feed Line
  • Oil Drain Kit With All Fittings
  • Stainless Steel V-band Clamps
  • Complete Fastener Kit With Gaskets
  • Complete Instruction Package with Photos

    Additional Fuel and Tuning is required but not included with kit



  • Turbo kit

    498-SN5.0K
    Turbo Kit
  • 94-95 SN95 Mustang 5.0L
  • 350-500 Rear Wheel Horse Power
    View this item
  • $1,499.99
    Ships
    06/01/12
    Accessories

    498-AF3
    Air Filter
  • Gray Washable Element
  • fits On 3 Performance Turbo Kit 94-95 5.0L SN95 Mustang
    View this item
  • $45.99
    Ships

    498-FOXFA
    Accessory Kit
  • 87-95 5.0L Mustang
  • Includes: Custom calibrated MAF Kit, 42# Injectors, 255lph Fuel Pump, Oil Filter Relocation Kit
    View this item
  • $679.99
    Ships

    498-TB4
    Turbo Blanket Kit
  • T4 Turbos
    View this item
  • $79.99
    Ships

    498-YPSN
    Exhaust S/S Y-Pipe
  • 94-95 5.0L Mustang
  • Allows the use of stock catback exhaust system
  • Stainless Steel V-Band Clamps
  • Built In Exhaust Cutout
    View this item
  • $159.99
    Ships