FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Phoenix F/X Drag Slicks


Phoenix Drag Tires
Phoenix F/X Drag Slicks

Product images may differ from actual product appearance.

The Phoenix has risen! These slicks feature a light weight design with a variety of sizes and compounds available. When Firestone decided to pull out of the drag racing business to concentrate on winning the Indy 500 and CART championships (which they did), the drag line was carried on by a distributor group. Eventually, though, the group disbanded. In 1998, a cadre of ex-Firestone drag racing personnel, together wih investors, formed Phoenix Race Tires. Phoenix engineers and technicians puchased the drag tire molds from firestone, remade all the molds to beter-than-new condition, and set off to produce a new generation of drag tires using the highly successful firestone compounds. In addition to addressing any manufacturing problems that may have existed, They've instituted new quality control procedues that result in a superior drag tire. If there's one thing that Phoenix engineers are adamant about, it's making sure that you get exactly matched tires. You know how this benefits consistency. Each and every tire is checked in a special device to measure roll-out and tread width when inflated to recommended pressure. The compound hardness is also checked. The bottom line is that nobody does a better job of matching tires than Phoenix.

Proper Tire Rollout Measurement Instructions

Phoenix Compound Ratings
SoftMediumFirm
F30F9F14
Compounds General Application Suggestions:
F30 - Soft, better traction, best suited for light cars (Under 2500 lbs.)
F9 - Medium, better traction, best all around compound, works well on most cars regardless of weight
F14 - Medium / Hard, good traction, best suited for heavy cars and cars with standard shift


22 Products
6.0'' Tread Width

932-PH364
Phoenix F/X Drag Slick
  • 26.0'' x 6.0'' - 15''
  • F9 Compound
  • $9.99
    $177.99
    Order Today Ships 01/21/15
    7.0'' Tread Width

    932-PH726
    Phoenix F/X Drag Slick
  • 26.0'' x 7.0'' - 15''W
  • Wide Tread Design
  • F9 Compound
  • $9.99
    $183.99
    Ships
    9.0'' Tread Width

    932-PH336
    Phoenix F/X Drag Slick
  • 30.0'' x 9.0'' - 15''
  • F9 Compound
  • $9.99
    $213.99
    Order Today Ships 12/04/14

    932-PH377
    Phoenix F/X Drag Slick
  • 28.5'' x 9.0'' - 15''
  • F9 Compound
  • $9.99
    $194.99
    Ships

    932-PH50R
    Phoenix F/X Radial Drag Slick
  • 30.0'' x 9.0'' -15''
  • F9 Compound
  • $9.99
    $251.99
    Ships
    10.5'' Tread Width

    932-PH101
    PHOENIX 10.5X31.0-15W
  • Compound F9
  • Tread Width 11.7
  • Sidewall Width 14.7
  • Diameter 31.5
  • Circumference 99.5
  • Weight 29LBS
  • Recommended Rim Width 12.0
  • $9.99
    $9.99
    $277.99
    Ships

    932-PH103
    PHOENIX 10.5X33.0-15W
  • Compound F9
  • Tread Width 11.5
  • Sidewall Width 14.7
  • Diameter 33.0
  • Circumference 103.75
  • Weight 32LBS
  • Recommended Rim Width 12.0
  • $9.99
    $9.99
    $287.99
    Order Today Ships 12/04/14

    932-PH374
    Phoenix F/X Drag Slick
  • 29.5'' x 10.5'' - 15''
  • F9 Compound
  • $9.99
    $9.99
    $216.99
    Ships

    932-PH380
    Phoenix F/X Drag Slick
  • 28.5'' x 10.5'' - 15''
  • F9 Compound
  • $9.99
    $202.99
    Ships
    11.5'' Tread Width

    932-PH360
    Phoenix F/X Drag Slick
  • 28.5'' x 11.5'' - 15''
  • F9 Compound
  • $9.99
    $238.99
    Ships

    932-PH362
    Phoenix F/X Drag Slick
  • 29.5'' x 11.5'' - 15''
  • F9 Compound
  • $9.99
    $243.99
    Ships

    932-PH376
    Phoenix F/X Drag Slick
  • 29.5'' x 11.5'' - 15''W
  • Wide Tread Design
  • F9 Compound
  • $9.99
    $9.99
    $255.99
    Ships
    12.2'' Tread Width

    932-PH337
    Phoenix F/X Drag Slick
  • 31.25'' x 12.2'' - 15''W
  • Wide Tread Design
  • F9 Compound
  • $9.99
    $9.99
    $282.99
    Ships
    13.0'' Tread Width

    932-PH379
    Phoenix F/X Drag Slick
  • 31.0'' x 13.0'' - 15''
  • F9 Compound
  • $9.99
    $9.99
    $273.99
    Ships
    13.6'' Tread Width

    932-PH55R
    Phoenix F/X Radial Drag Slick
  • 32.0'' x 13.6'' -15''
  • F9 Compound
  • $9.99
    $9.99
    $322.99
    Ships
    14.0'' Tread Width

    932-PH335
    Phoenix F/X Drag Slick
  • 32.0'' x 14.0'' - 15''
  • F9 Compound
  • $9.99
    $9.99
    $291.99
    Ships

    932-PH342
    Phoenix F/X Drag Slick
  • 32.0'' x 14.0'' - 15''W
  • Wide Tread Design
  • F31 Compound
  • $9.99
    $9.99
    $310.99
    Order Today Ships 12/04/14

    932-PH343
    Phoenix F/X Drag Slick
  • 32.0'' x 14.0'' - 15''
  • F30 Compound
  • $9.99
    $9.99
    $298.99
    Order Today Ships 12/04/14

    932-PH367
    Phoenix F/X Drag Slick
  • 32.0'' x 14.0'' - 15''W
  • Wide Tread Design
  • F9 Compound
  • $9.99
    $9.99
    $306.99
    Ships
    14.5'' Tread Width

    932-PH338
    Phoenix F/X Drag Slick
  • 32.0'' x 14.5'' - 15''
  • F9 Compound
  • $9.99
    $9.99
    $302.99
    Ships

    932-PH56R
    PHOENIX 14.5X32.0-15 Radial Slick
  • Compound F9
  • Tread Width 14.9
  • Sidewall Width 18.0
  • Diameter 32.3
  • Circumference 101.5
  • Weight 31LBS
  • Recommended Rim Width 14.0
  • $9.99
    $9.99
    $333.99
    Order Today Ships 12/04/14
    17.0'' Tread Width

    932-PH455
    Phoenix F/X Drag Slick
  • 33.0" x 17.0" - 15"
  • F9 Compound
  • $9.99
    $9.99
    $320.99
    Ships

    22 Products


    NOTE:

    All Classes: All cars should run tubes as they add to the overall stability of the tire / wheel package and repeatability of the tire from run to run.

    Air Pressure: The best rule of thumb is to use as much air as possible for the track conditions without making the tire spin.

    Tire Rotation: Tires should be mounted in the direction of the arrows. After several passes the tires can be swapped side to side. This rotation should occur whenever a medium grain appears on the tread face of the tire. Most cars can get by with rotation every 12 to 20 passes. In some cases you will need to rotate every couple of passes.

    Burn-Outs: Compound improvements have helped to reduce the need for long smoky burn-outs. Drive through the water box to prevent excess water being trapped in body panels, lock anti-roll device, begin burnout, watch for smoke to rise. At that time release braking device and accelerate to the start line. Go directly to the start line, it is not recommended to do any dry hops, as this will allow better heat transfer to the track surface. Please note, that this is a general guideline and if in your experience with your vehicle you have found that another combination in the burn-out process will work better, use your approach.

    Tire Storage: As with any rubber article, tires should not be stored in extreme heat or direct sunlight. Keep tires away from any high voltage electric motors and do not store on a concrete surface. Tires should be stored at room temperature and placed in a dark plastic bag and sealed if being stored for a long period of time. It is not recommended that traction restore or traction bite compounds be used, as once they are applied, they must be applied each time you race. These compounds create a chemical reaction which can result in a change to the compound (SEE WARNING BELOW).

    Mounting: Upon mounting of tires, check circumference of the set for matching sizes. This is to be done before installing rim screws. Adjust tires within 1/4” before running. Proper sizing is required for safety reasons. DO NOT USE ANY LIQUID FLAT FIXERS, as this will cause an out-of-balance condition. USE A TUBE FOR FLATS.

    WARNING: NEVER attempt to chemically treat or alter the tire and/or tread compound of the tire, such as soaking or the use of tread softener. This could result in premature or catastrophic tire failure with resulting serious injury or death. Tire changing should be done by trained personnel using proper tools and procedures. Failure to follow stated mounting procedures could cause faulty positioning of the tire and cause assembly to burst with explosive force sufficient to cause serious injury or death. Clean rim, lubricate rim and beads with rubber lubricant. ALWAYS lock wheel on mounting machine or place in safety cage, and use extension gauge and hose with clip-on air chuck. STAND BACK, NEVER exceed 35 PSI to seat beads.